Tempered or toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (a.k.a. annealed glass) does. The granular chunks are less likely to cause injury. Toughened glass is a kind of safety glass.
Toughened glass can be made on customer's request, clear toughened glass, ultra clear toughened glass, colored tinted toughened glass, printed toughened glass, back painted toughened glass, frosted toughened glass, toughened Laminated Glass, toughened Insulated Glass, toughened Vacuum Insulated Glass and so on.
Toughened glass can be used for furniture, buildings, doors, windows, walls, table tops, fence, partitions, railings, balcony, balustrade, shower room and so on.
toughened glass, clear toughened glass, color tinted toughened glass, ultra clear toughened glass, back painted toughened glass, silk printed toughened glass Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com
It can be seen that the contribution of auto parts remanufacturing to alleviating resources, environmental pressures, promoting energy conservation and emission reduction, and realizing the transformation of economic growth mode will become more and more obvious.
Auto parts remanufacturing will have a law
The "Administrative Measures for Remanufacturing of Auto Parts", which was drafted by the National Development and Reform Commission, is expected to be introduced this year and next. According to the NDRC, the state will encourage the establishment of a remanufacturing information management system, strengthen the classification and recycling management, and improve the reverse recycling logistics system for used automobiles, construction machinery and machine tools. At the same time, the "Administrative Measures for the Recycling of Scrapped Vehicles" will be revised and the Catalogue of Remanufacturing Industries will be compiled.
Auto industry analyst Xiang Hansong said that auto parts remanufacturing refers to the restoration of old auto parts by the process of dismantling, cleaning, inspection and classification, remanufacturing or upgrading, assembly, re-testing, etc. A batch manufacturing process with the same technical performance and product quality.
Remanufactured parts are 60% of the price of new parts
In March 2008, China issued the “Measures for the Administration of Pilots for Remanufacturing of Auto Parts†for the first time. At that time, 14 auto companies were established as pilot units for remanufacturing, and they were planned and managed. The enterprises involved were: China FAW, Anhui Jianghuai , Chery Automobile's three complete vehicle manufacturers and China National Heavy Duty Truck Group Jinan Fuqiang, Weichai, Yuchai and other 11 parts remanufacturing pilot enterprises.
Although it is not included in the pilot unit, in response to the call for national sustainable development and circular economy, Dongfeng Nissan clearly includes an important part of the recycling and remanufacturing of old parts and components in the recently launched green city plan.
In this regard, Chen Hao, deputy head of the marketing department of Dongfeng Nissan Passenger Vehicle Company, said: "At present, auto parts remanufacturing includes five categories, namely engine, gearbox, generator, starter and steering gear. Remanufacturing can save The cost is 50%, energy saving is 60%, and raw materials are saved by 70%. At present, the main direction of Dongfeng Nissan remanufacturing is gearbox, including AT (automatic), MT (manual) and CVT (continuously variable) series. Soon, consumers will see in the 4S shop of Dongfeng Nissan, the remanufactured parts and new parts will be compared and displayed. The remanufacturing has a clear "remanufacturing" mark, and there is a warranty period, and some products are only available in new pieces. %. This will greatly reduce the cost of the car for consumers, and also contribute to energy conservation and environmental protection.
Remanufactured parts are not "paper tigers"
Jia Xinguang, a senior expert in the automotive industry, said that automotive remanufacturing is a green project that repairs and reuses used auto parts, saving costs, resources, and energy consumption.
However, during the reporter's investigation and interview, most consumers expressed doubts about the quality of remanufactured parts. Mr. Wang Yu, a Beijing-based modern car owner, said in an interview that he could hardly believe the quality and quality of the remanufactured parts.
In this regard, Chen Yu stressed that the remanufacturing of parts and components is not a simple repair and utilization, but requires a relatively high technical means to make the remanufactured products reach new quality. Consumers can use them with confidence, not only the price is newer than the new ones. It's cheap, and it will provide the same quality service as the new ones. The most important thing is to save energy and be more environmentally friendly. The domestic parts remanufacturing industry must continue to achieve independent technological innovation and upgrade the level of remanufacturing technology is the key to development.
Jia Xinguang believes that if China's automobile remanufacturing industry is to develop rapidly, it must be multi-pronged. First of all, the automobile manufacturer should consider the future car recycling problem when designing the car; then the vehicle management department should formulate detailed regulations for the management of scrapped vehicles; in addition, the relevant departments should also strengthen the management of recycling vehicles. deal with.
car parts
Remanufacturing flowchart
In order to provide consumers with a deeper understanding of the auto parts remanufacturing process, our reporter specially interviewed the responsible person of auto parts remanufacturing of the automaker, taking the automaker to remanufacture auto parts as an example, and made the following simple flow chart.
Parts recycling
(Source: accident car, scrap car, etc.)
Return to factory remanufacturing
(produced according to strict technical standards)
Qualified inspection quality
(parameters and technical standards after inspection)
Factory
(marked with a clear "remanufacturing" logo and provide quality warranty service)
Circulation
(Compared with new parts in 4S shop, express price, warranty period, etc., consumers choose independently.)
The difference between new parts, remanufactured parts and repair parts
New parts, also called manufacturing parts, are produced by processing a batch of materials or parts. Good quality and durability.
Repair parts can also be called old parts, which refers to the technical measures taken to maintain their good technical condition and normal operation during the use of new parts.
Remanufactured parts are collected and dismantled after dismantling and dismantling a large number of similar used vehicles. The waste products with remanufactured value are used as remanufactured blanks, and they are upgraded and upgraded with high technology. The remanufactured products obtained must meet the standards of new parts in terms of technical performance before they can be used.
That is to say, the remanufactured parts utilize parts that have been scrapped, and the repair parts are objects that also have performance properties.
Therefore, the car analyst suggested to Hansong that when consumers choose to remanufacture parts, they must look for the “remanufacturing†mark on the packaging of the remanufactured parts, and can bear the corresponding warranty responsibility and after-sales service. Otherwise, it cannot be called a remanufactured piece, but an old piece or a repair part that is used to fill the number. 
Recently, the National Development and Reform Commission said that it will work with relevant departments to study and formulate the "Administrative Measures for Remanufacturing of Auto Parts" to formulate a reasonable and legal development path for the remanufacturing of auto parts in China.