Solar Panel,Poly Solar Panel,Mono Solar Panel,Solar Panel For Power Stations Fuzhou Mei Li Cheng Imp&Exp Co., Ltd , https://www.mlc-solar.com
1. The ceramic panel in the ceramic drum encapsulation is smooth, wear-resistant, resistant to strong impact, and easy to install.
2. The ceramic dry abrasion test was conducted before fluidization. The standards were as follows: 30 minutes of rotation at 200 RPM, test load: 30 lbs, sand particle size: 50-70 MESH, and abrasion amount: 60 mm3 or less.
3. The requirements for the steel plate mounted on the surface of the drum covered by the ceramic drum: The surface is sandblasted to Sa.2-1/2 grade, and the fat is removed. The surface of the non-rubbered part is also grit-blasted to Sa.2-1/2 level and sprayed with anti-rust primer.
4. The rubber plate in the ceramic drum encapsulation is required to use: thickness 5mm, hardness 70±5SHORE, tensile strength ≥ 19Mpa, elongation ≥650%, steel plate/rubber peel strength ≥30Kg/25Tmm, ceramic/rubber peel strength ≥ 50Kg/25Tmm.
5, ceramic drum rubber cold bonding using the German import TRS cold vulcanized plastic rubber, TRS metal surface treatment agent before the surface treatment. TRS cold vulcanized rubber can be wear-resistant, heat-resistant, flame-retardant, anti-static, anti-adhesion, stable performance is not easy to aging, fast and efficient bonding is 5-10 times hot vulcanized bag.
Technical indicators: