Roller shutter door , also known as "shutter door", lots of panel pieces connected together, fixed in the guide rail , take above reel as the center of rotation.
Roller shutter door is used for commercial facades, garages, shopping malls, hospitals, factories and mines and other public places or residential.Electric roller shutter door, especially for large openings, inconvenient to install the ground door , quick opening effect. Such as for the garage door, shopping mall fire shutter door.
Opening methods: Handing driving mode
Rope driving mode
Remote control driving mode
Electric switch driving mode
Roller Shutter Door,Galvanized Roller Shutter Door,Aluminum Roller Shutter Door,Transparent Roller Shutter Door Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.highspeedshutterdoor.com
Default part naming when creating a new part in 3D 
. 
. 
In the 3D CAD/CAM integrated software, the single file management mode and the multiple file management mode coexist, and both support the top-down, bottom-up assembly mode. Among them, Zhongwang 3D's multi-file management mode can manage all the assembly files into one Z3 document for management, which is beneficial to the maintenance of file integrity during data exchange, and also helps collaborative design for designers. Great convenience. Zhongwang 3D users can also enjoy the advantages of the two methods by using single and multiple file management methods according to actual needs.
Although the user can freely and flexibly select the assembly mode, in the case of not knowing the software, the user may have some operational errors and cannot successfully experience the powerful functions of the software. For example, when some users use the mid-view 3D multi-file management mode for bottom-up assembly, the software will display an "object is empty" prompt, which makes the user mistakenly think that the software can not continue to work. Next, this article will provide a detailed analysis of the causes of such problems and provide effective solutions.
Troubleshooter: Unable to insert part
When using 3D in the industry, users in many industries (such as the air-conditioning industry) like to use bottom-up assembly. When creating a new part PART file, the designer often does not choose to name it in the named input option (the designer usually does not determine the name in this step, but the file name after the part is designed). At this point, the software will name the part by "Part 00X" by default, as shown below:
When the part is designed, it will be part 00X after saving, as shown on the right:
But in the next assembly process, the problem arises - the part cannot be inserted into the assembly. In layman's terms, the user encountered a "parts inserted in, no objects" error.
Reasons for details: object name, file name concept confusion
Before explaining the cause of the problem for everyone, we need to understand the meaning of the object name and the file name: the object name refers to the name part 00X when it is newly created. As shown below:
The file name refers to the saved name, as shown on the right:
In the bottom-up assembly process of Zhongwang 3D, the user selects the object name instead of the file name. When the file name is modified, the surface appears to have changed, but the actual part object name has not changed. When the user assembles, the software defaults to the object name instead of the file name. As a result, the problem of being unable to insert parts is caused.
Two programs to solve difficult problems
Method one, to ensure that the object name of the assembly does not match the object name of the part.
Method 2, after opening the software, under the utility ------ Configuration ------ General ------- pop up the following dialog box, check the red circle as below to set the conversion to a single file mode.
After the new one, it will enter the single object mode. No matter the object name or file name is changed, it will not cause any files after the assembly. However, since this mode belongs to a single object file, when drawing a drawing, the drawing cannot be executed in the multi-object file mode (right mouse button - 2D drawing). If the single object file mode is out of the drawing, you need to create a new drawing file and project it to generate the drawing.
This article answers a more difficult operational problem in bottom-up assembly. In-depth understanding of the principle and application of Zhongwang 3D single and multi-file management methods is beneficial to us to better control this function point and improve the efficiency of file management. The author believes that as long as users have a deeper understanding of the functions of Zhongwang 3D software and conduct reasonable operations, they can fully experience the ease of use of the software and improve work efficiency. In order to help users understand all the functions of 3D2014 in 3D CAD, Zhongwang 3D launched the “3D†online communication discussion area, and the teacher can answer questions from users online to help you quickly master 3D design and actually invest in it. At work.