How much is an electrostatic floor one square electrostatic floor static floor price construction installation installation steps
Main components:
2 Rail clip
Components description:
W type Rail Elastic Clip/ SKL clip
Metro Fastening System,Underground Fastening System,Fastening For Light Rails,Fastening For Tram TAICANG ZHONGBO RAILWAY FASTENING CO., LTD. , https://www.railfastener.com
[Static Floor Grounding Requirements]
(1) The laying of the floor should be carried out after the indoor civil works and renovations are completed;
(2) The floor shall be smooth, clean, dry, free of debris, and free of dust. (3) The cables, electrical appliances, air, etc. laid under the floor shall be completed before the installation of the floor;
(4) The base of heavy equipment shall be fixed and the equipment shall be installed on the base. The height of the base shall be the same as the height of the top surface of the floor;
(5) 220V/50HZ power supply and water source are available at the construction site.
Steps for electrostatic grounding installation requirements 1. Serious inspection of the verticality of the ground and walls shall be carried out. If there is a major defect, it must be reformed, and if necessary, constructive opinions may be submitted to the relevant units.
2. Leveling of the horizontal line to determine the installation height of the floor to ensure that the floor is installed on the same horizontal line, measuring the length and width of the room, so that the installation must pay attention to the overall laying, so that the entire equipment will be made Nice and generous. 
3, use the mounting screws to fix it in a certain level of height, so that after the effective adjustment.
4. When there is a small area where there is no paving, it is necessary to carry out mulching to repair. This can be beneficial to the completeness of the floor block, but attention should be paid to the installation skill requirements, otherwise unsightly conditions will occur.
5, in the engine room and other places to install static floor grounding installation, use the bracket to adjust, otherwise there will be floor deformation and other issues. 
Xiao Bian concludes : The problem of electrostatic floor grounding must pay attention to strictly follow the physics knowledge to carry on the installation, its installment method and the skill are many, the Xiao Bian simple introduction for everybody here, hopes to be able to help everybody. For more information, please continue to pay attention to this site information platform.
2 T bolts with hex nut and Washers
4 Sleeper screw
4 Lock washers
4 Plastic Inserts
1 Rail pad
2 Insulator
1 Vibration absorber
1 Resilient sole pad
Type: SKL1, SKL3, SKL12, SKL14, etc
Surface: plain ( oil), black paint, color paint, zinc, hdg, etc
Rail pad
Raw material: EVA/Elastomer/Rubber
Surface: plain
Tie plate/ Rail base plate
Raw material: QT400-15, QT450-10, QT500-7, ZG25, ZG35, ZG45, etc
Surface: plain (oil)
Railway bolt
Grade: 4.6, 4.8, 5.6, 8.8, 10.9, 12.9, etc
Raw material: Q235, 35K, 45#, 40Mn2, 20MnSi, 35CrMo, 40Cr, 42CrMo, etc
Surface: plain (oil), zinc, hdg, black, etc
Plain washer/ Spring washer
Size: from 3/4-1, etc
Raw material: 65Mn, 60Si2Mn, 70#
Surface: black, zinc, hdg
Screw Spike/ Timber screw
Grade: 4.6, 5.6, 8.8
Raw material: Q235, 35K, 45#, 40Mn2, 20MnSi,
Surface: plain (oil), black, zinc, hdg, etc
We immediately learn about the working principle of the electrostatic floor: According to the requirements of physics, we all know that in the parallel circuit, the current value of the branch circuit is inversely proportional to the resistance, that is, the smaller the resistance of the ground equipment, the smaller the current through the human body. The smaller, the damage to the human body in this way will be very small, then when people come into contact with the metal shell will be to a large extent to avoid the danger, so the anti-static system will be effective to prevent electric shock. What are the requirements and installation steps for grounding an electrostatic floor ? Let's have a look right now.