Explosion-proof air-conditioning outdoor unit is heavy, the compressor is in the outdoor unit, outdoor unit is easy to vibrate, so the outdoor unit must be firmly installed. The outdoor unit can be installed on a mounting platform reserved for the building or on a stand made of angle steel (usually 40mm x 4mm angle steel).
To ensure safety, the installer must wear a safety helmet and fasten his seat belts. Outdoor racks are usually supplied by manufacturers of explosion-protected air conditioners, and the installer installs the combination according to the schematic diagram. Suitable for fixing on the vertical wall, hanging on the platform, fixed on the floor or roof.
According to the size of the fixed base of the outdoor unit, the fixing position of the bracket is determined, and the position marking line is drawn on the wall with a tape measure. The height of the wall outside the outdoor unit should be 10 to 15 centimeters lower than the window sill. Again, determine the vertical height of the bracket on the wall according to the height of the installation, then close to the wall and mark the center of the hole in the expansion bolt. After the bracket mounting holes are confirmed, further calibration is required. After the horizontal dimension of the bracket and the horizontal and vertical dimensions of the fixed expansion bolt hole, use the impact drill to drill holes in the marking center. The drill should be drilled horizontally without deflection. Select the drill diameter according to the expansion bolt specification. When drilling a hard concrete wall, the drill bit diameter is slightly larger than the diameter of the expansion tube. The drill diameter is equal to or slightly smaller than the outer diameter of the expansion tube.
After the wall hole is completed, hit the expansion bolt with a hammer on the wall, taking care not to damage the expansion bolt line. Secure the bracket with a nut. Do not tighten the nut first, then tighten the nut and secure the bracket. It is recommended that the expansion bolts of the mounting bracket be at least 10mm x 100mm (specification) and greater than 6, while the air conditioning above 4500W is not less than 8 expansion bolts.
If it is installed on a non-load-bearing wall or an insufficient outdoor unit wall, measures shall be taken to reinforce it. When installing the outdoor unit and the bracket, a rubber shock absorber must be installed, otherwise it will cause vibration and noise of the unit. Raise the outdoor unit to ensure the safety of equipment and installation personnel, especially the explosion-proof air conditioning units installed on the second floor or above, take the necessary safety precautions, install the safety belts, occupy the hoisting equipment, etc. Tools and applications. When the crane is in place, bolts should be bolted immediately to prevent the unit from falling. After the bolts are fastened, the fixing device cannot be loosened if it is a heat pump air conditioner, and the plug must be a night syndrome drainage pipe connected to the bottom of the sewer so that when the winter heats, the frost water can be sent to a designated place.
In general, the external machine needs to be installed lower than the indoor machine, but according to the actual installation situation, the father. External machines can be mounted higher than indoor machines, for example on roofs. This expression is zero, height difference should be within the scope of the specification. At the outlet of the hole, a return bend must be made to prevent swimming in the room; in order to prevent the oil from being lowered in the compressor, it must be returned to the ventricular receiver.
Commercial Grow Lights
Philizon enjoys a high reputation in Grow Light and Aquarium Led Light fields throughout Europe and America, Philizon also insists on taking high technology to design the newest&best Industrial Grow Light and aquariumlight constantly as the market request. Our R&D team with more than 10 people has rich experience in appearance design, electronic structure,heat dissipation simulation analysis, optical lens design, lightcontrol system etc. Most of our hydroponics full spectrum led grow lighting and marine coral reef ledaquarium lighting are private modules,we have 10 more design patent and utility model patent till now.
Our Industrial Grow Light is popular in led market, cause its elegant outlook and its high quality and competitive price.
What is Full spectrum led chip ?
It is the newest trend for indoor plants. Advanced LED Grow Lights chip,not provide sigle color ,provide broad spectrum 400nm~840nm,simialr with sun light ,but most is red and blue,it is best for plant grow.This is a revolutionary step for Grow light which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.
Plug with listed certificate safe to use.
The Plug you can choose
Ageing Test
Our Quality Control systems
Package
Our professional Square Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Our Company
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Philizon Industrial Grow Light are perfect for green house applications and much more!