Full color camera
Hikvision's full-color camera has been launched for nearly a year, from the initial 200W full-color camera to the subsequent 400W ultra-clear full-color camera; from the initial full-color tube machine to the current full-color family, Hikvision's full-color products are widely loved by users for its excellent night performance. The 4 models are also suitable for more application scenarios and monitoring distances.
Full color camera
The following will answer all the questions about the full-color debugging recently collected, I hope it can help you.
FAQ1, Summary of the method of turning on the soft light in full color
Hikvision cameras not only show great effect in the daytime, but also show excellent color images at night with excellent low-light effects and soft fill light. Recently, how to turn on the fill light is a matter of great concern to everyone. Everyone answers systematically.
01. Automatically turn on in low light conditions
The full-color camera uses the automatic mode by default, and the full-color camera will be turned on automatically according to the environment.
The lower version full-color camera supports automatic start, but cannot be adjusted to the needs of different scenes through sensitivity adjustment. v5.5.4 and above support the soft light sensitivity adjustment function, increase the sensitivity, the sooner the soft light turns on.
Sensitivity adjustment path: web-side-configuration-system-system settings-peripheral configuration-sensitivity (0 ~ 7 adjustable).
At the same time, the brightness of the soft light can also be adjusted on this interface. Selecting the manual mode can set the fixed brightness of the soft light in the range of 0 ~ 100 (default 50%); selecting the automatic mode full color will automatically adjust the brightness, and the brightness value is large It can be set according to the situation (for example: the automatic mode sets the brightness of the warm light to 80%, then the full color adjusts the brightness of the warm light from 0 to 80% according to the environment).
Full color camera
02. Timed opening (IPC)
The previous section introduced the method of automatically turning on the soft light. Since there is an automatic turning on method, the manual turning on method is indispensable. Manual mode can force the soft light to be turned on for a set period of time.
In the old version, you can choose to turn on the soft light at night in the configuration-image-display settings-day and night conversion, but the image is black and white at the same time. The new version can choose to manually set the time period to turn on the soft light in the peripheral configuration, and the image remains in color.
Timing start path: web-side-configuration-system-system settings-peripheral configuration-timing (start from start time to end time).
Full color camera
FAQ2, How to turn on the strong light suppression (IPC)
When night falls, street lights and car lights turn on. The direct light makes people unable to look directly. It is also a challenge to the camera. The Hikvision full-color camera has a strong light suppression function. This function is specially developed for scenes to reduce strong light interference and see the details under strong light.
However, many users have recently responded to the full-color IPC when the glare suppression is turned on, but the prompt box below is not found, but now let's take a look at the specific operation.
Full color camera
As shown in the figure above, the prompt mainly involves turning off the functions in WDR, Slow Shutter, and Fog Through. Some of the versions do not have the fog-passing function. If you cannot find the fog-passing option in the path, you only need to close the slow shutter and wide dynamic according to the prompt (Note: the dome camera does not need to forcibly turn off the fog, wide dynamic and slow when turning on the strong light suppression) shutter).
Wide dynamic shutdown path: configuration-image-display settings-backlight-wide dynamic, select to close.
Slow shutter closing path: configuration-image-display setting-exposure-exposure time, select exposure time less than 1/25 (default 1/12).
Path to close fog-passing: configuration-image-display settings-image enhancement-fog-passing, just select close.
FAQ3, Backlit scene, the channel picture is dark
Full color camera
As shown in the above figure, it is a common channel scene. The brightness outside the channel is usually higher. When shooting such scenes, there will often be a large difference in brightness. Of course, there is no need to panic when encountering this situation. The full-color camera has a true wide dynamic function, which is specially designed for this situation. As can be seen from the above figure, after the wide dynamic function is turned on, there is a significant improvement, the overall brightness of the picture rises, and the scene in the channel is clear.
Note: Strong light suppression conflicts with the WDR function and cannot be turned on at the same time, and the slow shutter and fog penetration must be turned off to turn on the WDR function
Wide dynamic start path: configuration-image-display settings-backlight-wide dynamic, just select open.
FAQ4, Overexposure when shooting strong luminous objects at night
Full color camera
The picture above is a beautiful night view of Hangzhou Qianjiang New City. In order to let everyone enjoy the light show of Qianjiang New City, the editor also took pictures of the exquisite clips under the mosquito bite. Unfortunately, the first shot was not good, and I found that the lights were a bit hazy.
Due to the low ambient illumination at night, the full-color camera will let the light in the scene enter by default, resulting in some overexposure when shooting luminous objects. After lowering the gain, the overall brightness of the picture is reduced, the overexposure of the light is significantly improved, and the haze caused by the light is reduced.
Gain adjustment path: configuration-image-display setting-exposure-gain, just reduce the gain.
FAQ5, full-color ball machine linkage tracking and white light linkage function
Compared with the old ball machine, Hikvision full-color ball machine added two linkage modes: linkage tracking and white light linkage in the Smart event. Among them, regional intrusion detection, cross-border detection, entering area detection and leaving area detection support white light linkage, in addition to audio anomaly detection and face detection, all support linkage tracking.
White linkage activation method: configuration-event-Smart event-linkage method-white light linkage, just check it.
Linkage tracking start method: configuration-event-Smart event-linkage method-linkage tracking, just check.
Full color camera
FAQ6, Soft light and infrared switching method of full-color ball machine
The full-color series of products use soft light to fill light, and the full-color ball machine not only has soft light fill light but also supports infrared fill light. Among them, the soft light is used to fill the light within a distance of 0 ~ 30 meters, and the infrared light is used for 30 ~ 150 meters.
The full-color ball machine double-light supplementary light adopts the automatic switching method for automatic switching. The optical zoom magnification of the dome camera is 0 ~ 1 times for color images, and 2 ~ 20 times for black and white images.

Malleable Iron Pipe Fittings normally use for water pipelines,also can use for oil and gas. Because some of them need Galvanizing, so some clients all it G.I fittings or Iron Fittings. The fittings included Elbow,Nipples, Tees, Caps, Unions, plugs, etc. The details as follow:

Standard:

For BS Pipe Fittings: BS 21:1985                                          
For ANSI pipe fittings: ANSI/ASME B1 20.1-1983                          
For DIN pipe fittings: DIN 2950/1692/2999                                

                                                           

Mechanical Properties:                                        

1)Tensile strength>or=330Mpa                                        
(2)Bending strength>or=520Mpa
(3)Shearing strength>or=284Mpa
(4)Elongation eate>or=8%
(5)Hardness<or=HB150

 

Hydraulic Test 

Test pressure:2.5Mpa
Working pressure:1.6Mpa

 

Chemical Compositions:

C:2.6%-2.8% Si:1.5%-1.8%
Mn:0.55%-0.7% S:0.25%-0.3%

 

Type:

Beaded, Beaded with rib, Banded,Banded with rib,Plain

Finishing:

Black, Hot-dipped galvanized, Electro-galvanized


Beaded Type:

beaded type

Banded type:

banded type


Malleable Iron Pipe Fittings

Malleable Iron Pipe Fittings,Galvanized Fittings,Iron Fittings,Zinc Coated Fittings

HEBEI ZIFENG NEW ENERGY TECHNOLOGY CO.,LTD. , https://www.zifengpipeline.com

Posted on