About high speed Door Accessories:
1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box
2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light
For some main accessories, here is detain introduction:
1).24G radar sensor:
Brand: Hofic
Technology: Microwave processor
Maintain time: 0.5s
Protection: IP54
Transmitting frequency: 24.125GHz
Maximum installation height: <5meter
Transmitting power density: <5mw/cm2
Power consumption: <1W(VA)
Installation angle: 0-90°(lengthways) -30-30°(crosswise)
Supply voltage: AC&DC 12V-30V
2).Photocell:
Approval CE & ISO9001
Power supply AC/DC 12-30V
Static current 25A
Action current 40mA
Mounting distance Max 10m
NO or NC contact Done by NO./NC. contact selection
Working environment temperature -42℃ to +45℃
Working environment humidity 10 to 90%RH
Appearance dimensions( controller) 123*50*32mm(L*W*H)
Appearance dimensions(Magic eye head) 19*13mm(L*D)
3). Remote control
Operating Voltage: AC220V/50HZ+-20%
Transmit power:≤100mW;Super regenerative module, strong anti-interference
Operating temperature:-30℃-+70℃
Working frequency: 433MHZ;transmitter 1527, millions of encoding chip
Accept sensitivity:≤110dB
Manipulation method: electric remote control
Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip
Configure the function: Up, down, stop, anti-lock full-featured reproduction
4). Magnetic loop
Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V
Power: <2VA
Continued electrical output: 7A / 250V AC
Frequency range: 20 to 200K Hz
Response time: infinity (factory setting) or adjust maintain time
Sensitivity: 0.01% to 0.1% divided into 3 levels
Protection level: IP30
Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2
Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH
Operating temperature: -25 ℃ to 70 ℃
Storage temperature: -40 ℃ to 85 ℃
Relative humidity: <90% non-condensing
Temperature compensation: automatic compensation up to 50 ℃ / h
Connection type: 11 pin DIN rail socket
Dimensions: 41 * 78 * 85 mm (width * height * length)
Weight: 250 grams
5). manual push button
This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.
Door Exit Button Push To Exit Switch Door Opener For Access Control Security
Main Feature
Fashionable appearance
Made of ABS Plastic
Easy to install and operate
Used for access control
Specification
Mechanical Life: 500,000 test
Material: Plastic
6). Limit switch encoder
Voltage: DC5V-24V
Output voltage: high voltage≥85%Vcc, low voltage≤0.5V
Maximum mechanical speed:6000rpm
Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.
Current consumption:≤30mA
Response frequency: 0-100KHZ
Protection: waterproof,oil proof,dust prevention, IP54
The output code system: binary code
Operating life: MTBF≥30000(+25℃,2000rpm)
Rotational inertia:4.0x10-8kgm²
Maximum load:radial direction20N
Axial direction:10N
Weight: about 0.4kg
,Electronic High Speed Door Accessories Shenzhen Hongfa Automatic Door Co., Ltd. , http://www.hffastdoor.com
Ceramic fiber has the advantages of light weight, high temperature resistance, small heat capacity and good heat insulation performance. It can be widely used in metallurgy, electric power, machinery and chemical heat energy equipment to achieve the effect of heat preservation. Compared with traditional materials, it is more energy efficient and has a broad development prospect. “High-performance Ceramic Fiber National and Local Joint Engineering Research Center†was built by Suzhou Saifei Group Co., Ltd., Institute of Aerospace Materials and Technology, China Aerospace Science and Technology Corporation, Suzhou Institute of Nanotechnology and Nano-Bionics, Chinese Academy of Sciences, Institute of Chemistry, Chinese Academy of Sciences Beijing University of Aeronautics and Astronautics, Suzhou University, Tianjin University of Technology, etc.
The National High-Level Ceramic Fiber National and Local Joint Engineering Research Center brings together domestic academicians, materials experts and high-end engineering and technical personnel to form a basic research and engineering project focusing on silicon carbide fiber and engaged in multi-variety and serialized high-performance ceramic fibers. Research and development of research and application technology research teams. At present, the center has set up four laboratories and an analytical testing center with over 20 research projects.
In the future, the Engineering Research Center will take the demand for functional silicon carbide fiber composite materials in the national major engineering and civil high-tech fields as the traction, and focus on solving the bottleneck problems of key technologies and equipment in industrial development, and promote industrial technology advancement and structural adjustment. Leading and driving the development and application of functional silicon carbide fiber and its composite materials in China, supporting and promoting the leap-forward development of China's aviation, aerospace and marine equipment, and becoming the source of innovative technology and research and development core in China's high-performance ceramic fiber field. Industrial Technology Center, Talent Training Center, Technical Consulting Service Center and International Exchange and Cooperation Center.
Abstract On June 20th, the National High-Level Ceramic Fiber National and Local Joint Engineering Research Center officially settled in Suzhou Industrial Park. The center will focus on the engineering of organic precursor-converted ceramic materials and promote the development of the national high-performance ceramic fiber industry. High performance ceramic fiber production...
On June 20th, the National High-Level Ceramic Fiber National and Local Joint Engineering Research Center officially settled in Suzhou Industrial Park. The center will focus on the engineering of organic precursor-converted ceramic materials and promote the development of the national high-performance ceramic fiber industry. The high-performance ceramic fiber industrialization seminar was held at the same time. Six academicians of the Chinese Academy of Engineering and more than 50 relevant industry experts gathered to discuss the development direction and industrialization of high-performance ceramic fiber.