kaiping aida sanitary ware technology co.,ltd , https://www.kpfaucets.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>How to remove imported bearings How to remove imported bearings
In the process of using imported bearings; timing eradication is very important. So how to properly remove imported bearings? Let me give us an analysis below. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
When the imported bearing is removed for inspection, first make a record of the appearance by shooting, etc. Others; acknowledge the amount of lubricant remaining and sample the lubricant; then remove the bearing.
The removal of the bearing is divided into rough washing and fine washing; and the metal mesh frame can be placed on the bottom of the used container.
When rough washing; remove the grease or adhesive with a brush on the top of the oil. If you change the bearing in the oil at this moment; be careful to damage the rolling surface due to foreign matter.
During fine washing; gradually change the bearing in the oil; must be carefully carried out.
The general use of the scavenger is neutral non-aqueous diesel or kerosene; occasionally use warm lye, etc. as needed. Regardless of which scavenger is used; always filter and keep clean.
Immediately after eradication; apply anti-rust oil or anti-rust grease to the imported bearings.
Recommend to friends comments close window Bearing related knowledge How to improve the life of rolling mill bearings?
Matters needing attention in the work of the bearing: contact to see the problems of the imported bearings in the work and disposal methods in the work of the bearing matters: listening to the correct way to remove the bearing
This article links to http://
Please indicate the bearing network http://
Previous:The basic knowledge of Class 1 self-aligning ball bearings: The gear pump transports liquid is not afraid of "sticky"
Source: China Bearing Network Time: 2017-12-28