Use these 7 circles to sweep, and use the curves of the center of the circle. After the sweep is completed, a 7-core rope solid model is formed. With the center of the first three straight lines as the center, six 7-core ropes are arrayed in the circumferential direction, so that the outer part of a 7*7 core wire rope is completed. Next, do the center part of the rope, freeze the rope made in front, so the calculation of the computer will be much faster, do the middle 7-core rope, use the sweep to make a 7-core rope through the center. This step method has already been mentioned above and will not be repeated here. Finally, the color of the rope is unified, and a 7*7 wire rope is completed. The production of wire rope is a typical example of the use of the Zhongwang CAD sweep function, and the sweep function has been used many times here. Note that the twist of the rope is consistent, so the effect will be better. In the process of making this wire rope, it may be felt that the computer response is slow, which is normal, because the surface of the graphic is more complicated, and the user tries to freeze the unused graphic when there is no need to display many curved surfaces. The sweep function of Zhongwang CAD can also do many Other useful solid models, such as springs and threads. As long as you master this function skillfully, you will be able to complete these graphics with ease. embossed stainless steel sheet Stainless Steel Embossed Sheet,Stainless Embossed Steel,Embossed Steel Sheet Hong-Steel Co., Ltd. , http://www.qiyistainlesssteel.com
Previous page 1 2 3 Next page