Metal material size and weight (2)
The masonry bit is a variation of the Twist Drill Bit, the bulk of the Tool is a relatively soft steel, and is machined with a mill rather than ground. An insert of tungsten carbide is brazed into the steel to provide the cutting edges.
Hand Tool,Tungsten Carbide Masonry,Premium Carbide Drill,Concrete Drill Bits Set Drill Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com 2, flat steel (theoretical weight: kg / m) flat steel width Thickness (mm) flat steel 3 4 5 6 7 8 9 10 11 12 14 16 18 20 twenty two 25 28 30 32 36 40 45 50 56 60 flat steel 10 0.24 0.31 0.39 0.47 0.55 0.63 0.86 0.94 1.10 1.26 1.41 1.57 1.73 1.96 2.20 2.36 2.51 2.83 3.14 3.53 flat steel 12 0.28 0.38 0.47 0.57 0.66 0.75 0.85 0.94 1.04 1.13 1.32 1.51 1.70 1.88 2.07 2.36 2.64 2.83 3.01 3.39 3.77 4.24 flat steel 14 0.33 0.44 0.55 0.66 0.77 0.88 0.99 1.10 1.21 1.32 1.54 1.76 1.98 2.20 2.42 2.75 3.08 3.30 3.52 3.96 4.40 4.95 flat steel 16 0.38 0.50 0.63 0.75 0.88 1.00 1.13 1.26 1.38 1.51 1.76 2.01 2.26 2.51 2.76 3.14 3.52 3.77 4.02 4.52 5.02 5.65 flat steel 18 0.42 0.57 0.71 0.85 0.99 1.13 1.27 1.41 1.55 1.70 1.98 2.26 2.54 2.83 3.11 3.53 3.96 4.24 4.52 5.09 5.65 6.36 flat steel 20 0.47 0.63 0.79 0.94 1.10 1.26 1.41 1.57 1.73 1.88 2.20 2.51 2.83 3.14 3.45 3.93 4.40 4.71 5.02 5.65 6.28 7.07 flat steel twenty two 0.52 0.69 0.86 1.04 1.21 1.38 1.55 1.73 1.90 2.07 2.42 2.76 3.11 3.45 3.80 4.32 4.84 5.18 5.53 6.22 6.91 7.77 flat steel 25 0.59 0.79 0.98 1.18 1.37 1.57 1.77 1.96 2.16 2.36 2.75 3.14 3.53 3.93 4.32 4.91 5.50 5.89 6.28 7.07 7.85 8.83 flat steel 28 0.66 0.88 1.10 1.32 1.54 1.76 1.98 2.20 2.42 2.64 3.08 3.52 3.96 4.40 4.84 5.50 6.15 6.59 7.03 7.91 8.79 9.89 flat steel 30 0.71 0.94 1.18 1.41 1.65 1.88 2.12 2.36 2.59 2.83 3.30 3.77 4.24 4.71 5.18 5.89 6.59 7.07 7.54 8.48 9.42 10.60 flat steel 32 0.75 1.00 1.26 1.51 1.76 2.01 2.26 2.51 2.76 3.01 3.52 4.02 4.52 5.02 5.53 6.28 7.03 7.54 Masonry Drill
Masonry bits typically are used with a Hammer Drill, which hammers the bit into the material being drilled as it rotates; the hammering breaks up the masonry at the Drill Bit tip, and the rotating flutes carry away the dust.
Hammer drill bits often use special shank shapes such as the SDS type, which allows the bit to slide within the chuck when hammering, without the whole heavy chuck executing the hammering motion.
Masonry bits of the style shown are commonly available in diameters from 3 mm to 40 mm. For larger diameters, core bits are used. Masonry bits up to 1,000 mm (39 in) long can be used with hand-portable power tools, and are very effective for installing wiring and plumbing in existing buildings.
