Home>Bearing knowledge>Oil film bearing avoids mixing oil and its low torque smooth grease seal
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Oil film bearings avoid mixing oil and its low torque smooth grease seal

Source: China Bearing Network Time: 2018-01-20

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
1. Oil film bearings avoid smooth mixing of oil mixing; avoid abrasion or sintering of conflicting moving parts such as bearings and gears; avoid and reduce wear; reduce conflict resistance; prevent equipment attacks; improve equipment production power and save power; Power useful utilization; add economic benefits; is the main task of smooth handling.
1. Under the premise of reasonable fuel tank capacity; adhere to the reasonable oil level of the fuel tank; often add smooth oil to the fuel tank; keep the oil in the fuel tank at a reasonable operating oil level; degas the oil; deposit the machine; The oil temperature in the box is favorable.
2. Smooth handling is a professional skill management; full-time smooth skills should be set up for personnel; smooth management system should be formulated; smooth skill knowledge training should be carried out.
3. Punctuality, positioning and extraction of oil samples during operation; testing and testing of oil odor, color, viscosity change, water content, water separation function, pollutant type and content, anti-foam function, etc. At 0. 1%; the mechanical wear is sharply added, and the smoothness beyond 0. 5% will be very risky.
4. Analyze the record of each test; make a prediction for the unsatisfactory smooth condition; formulate an improvement or prevention method. It is safe and reliable for the oil level, oil quality, oil temperature, oil pressure control alarm and interlocking of the system; The episode.
Second, low torque smooth grease seal 1. Dip the concentrated sodium nitrite solution to remove the product; immerse it in a solution rich in 15%-20% sodium nitrite and 0.6% sodium carbonate; then pile it up. Select the method to have a shorter rust prevention period Usually only for 7-14 days; and in the rainy season; because the climate is humid; only 2-3 days must be re-processed; demand costs labor and money.
2. Immerse in the anti-rust tank to immerse the bearing in the aqueous solution of 5% sodium nitrite and 0.6% sodium carbonate; the anti-rust effect is good; but many anti-rust tanks and other equipment; occupy a lot of space; .
3. The oil-coated products are coated with the same anti-rust oil as the anti-rust paint. This method must be removed before the next process is performed;

Recommend to friends comments close window

Bearing related knowledge
Bearing support picks the problem to be considered
The technical knowledge of the basic knowledge of the class 0 deep groove ball bearings for the maintenance of centrifugal pump bearings is discussed in detail: "Common equipment" for bearing ring casting
Bearing device impact on bearing life


This article links to http://
Please indicate the bearing network http://

Previous:Bearing damage and countermeasures Next: "Imported bearing ring double end" grinding

Clean And Strip Disc

Strip clean disc is a new kind of Nylon fiber abrasive tools, can be the best substitute for traditional abrasive tools such as shutters and wire brushes.It is based on high-strength & wear-resistant fiber mesh, and the resin elastomer and nylon fiber and emery are bonded together by special process.


Materials
Rust remover disc uses high-strength wear resistant fiber mesh as the base material, and organically combines resin elastomer and
high-quality emery through a special process to form a high strength, high wear resistant, honeycomb shaped grinding wheel
Range of Application
* widely used for grinding and polishing of metal, glass fiber, wood, stone and other surfaces * Easily remove paint, varnish,
solder joints, rust, sealant, scale, oxidation and other surface contaminants. Poly strip disc wheel an ideal tool for surface treatment such as paint, rust, and scale removal
High Performance
The grinding wheel will not damage the surface of the object, the grinding force is uniform, the processing effect is uniform,
wear resistance, strong water resistance, strong plasticity and good softness. Dirt will not block the fine seams of the grinding
surface, no rust, no fall off, low grinding sound and less dust



The strip clean disc network structure has the following characteristics:
1. Does not damage the surface of the object
2. The grinding force is uniform, and the grinding effect is uniform
3. Abrasion resistance, strong water resistance
4. Strong plasticity, good softness, suitable for various shapes of objects to be ground.
5. The dirt does not block the surface of the abrasive tool, there is less shedding, less noise, and less dust.


We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Clean And Strip Disc 2 31 JpgClean And Strip Disc 2 13Clean And Strip Disc 2 33 Jpg

Clean And Strip Disc,Shaft Flap Wheel,Shank Mounted Flap Wheel,Keying Flap Wheel With Shaft

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com

Posted on