Phlizon COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.
Best full Spectrum designed to perfectly match large areas of indoor plants, especially for Medical Plant.
COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.
1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
1000w 2000w 3000w 400w led grow light Features
Indoor grow light
COB series, high power branded CREE COB with high Par value and deeper penetration
VEG/BLOOM and STRONGER switches for each grow stage.
Special spectrum for plant growing to increase the yield.
Building to Harvest: Beneficial for seeding to fruiting stage.
Good quality fans with low noise.
Easy to install by minute
Energy Saving, environmental friendly
3 Years Warranty
Detailed images of 1000w 2000w 3000w 400w cob led grow light
Applications
Hydroponics, Horticulture, Agriculture and Greenhouse
Locations: Farm, Exhibition, Garden, Home, Urban, Bonsai, and University Lab
Growth of Fruits, Vegetables, Flowers and so on
Seeding, Rooting, Breeding, Flowering and Fruiting period
Packaging and Shipping
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
If you are interested in, and
1.own several store for agriculture in your local market
2.or in the business of grow light equipment
3.or good relationship with grower or greenhouse owner
To be a distributor, max support will be offered:
1.price support
2.technical support
3.new product support
4.24 hours after-sales service online
Cob Led Grow Light,Led Grow Light,1000W Led Grow Light,Full Spectrum Led Grow Light Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com
1. Sprayer preparation work 1 Check whether the installation of bolts meets the design requirements and find problems in time.
2 Clean up debris from the blast site, and install the PZ-5 concrete shotcreting machine in a stable and safe place on the top wall surrounding the rock. The distance from the track can not be less than 0.5m. Connect the wind and water pipelines. The feeding pipeline shall be straight and shall not have sharp bends. The joints shall be tight and no leakage of air shall be allowed. It is forbidden to use non-static antistatic plastic tubes as conveying tubes.
3 Check whether the spraying machine is in good condition, and put the electricity into no-load test run, fasten the friction plate tightly, and no air leakage phenomenon shall occur.
4 Before blasting, the rock face must be washed with high-pressure feng shui. Thickness marks should be placed on the vault and the two gangs of the roadway.
5 Spraying personnel should wear complete and effective labor insurance products.
2. Shotcrete spraying concrete operation process Before the spraying work begins, the old belt should be laid on the spraying site so as to collect the rebound material. The rebound rate should not exceed 10%.
1 open water, open air, adjust the amount of water, keep the wind pressure not less than 0.4MPa, the water pressure should be about 0.1MPa higher than the wind pressure, the amount of water is controlled by the shooter's experience, water-cement ratio 0.4.
2 The sprayer operates the sprinkler and flushes the rock face from top to bottom.
The 3PZ-5 type concrete shotcreting machine was used to deliver electricity, and a shotcreting machine was used to spray the slurry.
4 According to the feeding situation, adjust the amount of feng shui again to ensure that there is no dry spot on the spray surface, no runny, strong adhesion and less rebound material.
5 The sprayer sprays in sections in the order from the bottom to the top wall.
6 The sprayer should be sprayed as far as possible perpendicular to the spray surface. The included angle should not be less than 70 degrees.
7 When spraying, the trajectory of the nozzle should be spiral, according to the diameter of 200-300mm, a circle presses the semi-circular method to move evenly and slowly.
8 The concrete shotcreting machine sprays concrete at a thickness of 50-70mm, and must be re-injected in time. The interval between sprayings shall not exceed 2 hours. Otherwise, use high pressure water to re-flush the sprayed surface.
9 should be equipped with two people, one person holding a spray nozzle, one person assisted lighting and responsible for contact, observe the top of the security and jet quality.
3. Stopping operation of the spraying machine 1 After the spraying is finished, the operation shall be performed in the order of stopping the material, stopping the water, and then stopping the power and then finally closing the wind.
2 After the spraying work is completed, remove the spray head, clean the water ring and the mortar or material inside and outside the sprayer, and wind up the wind water pipe.
3 Clean up and collect the rebound materials, and use clean materials in the shift.
4 Sprinkling concrete began to sprinkle after 2 hours of curing, and core strength was measured after 28 days.
Compare led grow light to traditional HPS/MH grow light
WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?
1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.
2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.
3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.
PHLIZON LOOKING FOR DISTRIBUTOR ALL OVER THE WORLD
How to operate? What is the shotcrete operation process? Henan Haoli sprayer manufacturers introduced in detail the injection operations of the HaoLi sprayer, the operation procedures of the sprayed concrete, and how to stop the operation. He hoped to help the safe operation of the spray gun.