Today, glass cistern has become one of the most popular products in the bathroom products market. The design of the glass Toilet Tank is made of high-quality glass materials, and the appearance is beautiful and generous, which can add a high-end and fashionable atmosphere to the bathroom and become a beautiful landscape in the bathroom space. Glass Cistern, Glass Toilet Tank, Glass Cover Toilet Cistern, Glass Toilet Cistern Guangdong Fabia Intelligent Technology Co., Ltd , https://www.fabiaintelligent.com
2) Check if the fuse of the barrier control box is in good condition (replace the fuse)
3) Check whether the wiring is correct, whether the connection terminal wiring is in good contact, and whether the control box plug is inserted correctly;
4) Check if the timing belt is in good condition (replace the timing belt)
5) Motor failure (replacement of motor)
6) Failure of the control box (replacement of the control box)
7) Failure of the drive capacitor (replacement of capacitor 2 and lift can not be reduced 1) Check the manual button is intact (replace manual button)
2) Check whether the photoelectric switch outputs the signal in place after the barrier is lifted into position (replace the photoelectric switch)
3) Check whether the manual button wire is broken (excluding the disconnection phenomenon)
4) The motor trips and starts the power line (open circuit)
5) If with infrared protection device, check whether the infrared protection receiver has a protection signal output (adjust the infrared protector or replace the infrared protector)
6) If there is a sense of protection, check if it is dead (reset)
7) Failure of the control box (replacement of the control box)
3, the barrier can not drop 1) check the manual button is intact (replace the manual button)
2) Check whether the photoelectric switch outputs a signal when the barrier is lowered to position (replace the photoelectric switch)
3) Check whether the manual button wire is broken (excluding the disconnection phenomenon)
4) Failure of the control box (replacement of the control box)
5) The electric motor is lifted and the power line is disconnected (excluding the disconnection phenomenon)
4. The brake lever is shaken during the lifting process of the barrier gate 1) Check whether the reducer base is loose (correction gear)
2) Check if the transmission gear is intact (replace the transmission gear)
3) Check if the spindle bearing is damaged (replace the bearing)
4) Check if balance spring is damaged (replace spring)
5) Check whether the connecting rod starts in the opposite direction (adjust the motor wire and control wire)
5ã€Do not stop at the gate 1) Damage to the photoelectric switch (replace the photoelectric switch)
2) On-position pull-out lever on photoelectric switch (replacement of photoelectric switch puller)
3) Poor contact of photoelectric switch connector (rework connector)
4) The open circuit between the photoelectric switch and the control box is disconnected (excluding the disconnection phenomenon)
5) Failure of the control box (replacement of the control box)
6, non-stop after the Daozha in place 1) damage to the photoelectric switch (replacement of photoelectric switch)
2) On-position pull-out lever on photoelectric switch (replacement of photoelectric switch puller)
3) Poor contact of photoelectric switch connector (rework connector)
4) The open circuit between the photoelectric switch and the control box is disconnected (excluding the disconnection phenomenon)
5) Failure of the control box (replacement of the control box)
7, Barrier stop after power transmission 1) Failure of the control box (replacement of the control box)
8. In the course of using the barrier, the main body of the barrier is shaken. 1) Open the barrier gate door and tighten the barrier bolt.
9. When the barrier is up and down, the brake lever cannot be vertical or parallel. 1) Open the barrier cover and adjust the photoelectric switch up and down.
10. Barrier remote control found insensitive during use. Remote control distance is short. 1) Remote control battery is low (replace battery)
11. The speed is too slow when the ramp lifts, and it cannot be started with a little external force. 1) Damage to the drive capacitor (replacement of capacitance)
2) Motor coil damage (replace motor)
In addition to the exterior design, the performance and functionality of glass toilet tanks are also noteworthy. The glass material has the characteristics of anti-corrosion, wear resistance, and easy cleaning. It can resist the corrosion of chemical substances and is not easily damaged by external forces. At the same time, it can be easily cleaned and has a long service life. The glass toilet water tank can also be applied to various water qualities, and will not be damaged due to the difference in water quality, which ensures the long-term use of the toilet water tank.
Glass toilet cisterns also offer advantages when it comes to installation and maintenance. Due to its lightweight design, it does not require too much support and can be installed more easily and conveniently. And because of the material properties, it can be easily cleaned and maintained, making toilet tank maintenance even simpler.
In short, the glass cistern has become an indispensable part of the modern bathroom space due to its beautiful appearance, strong material and easy maintenance. It is not only practical, but also can improve the sense of class of the entire bathroom space, and has become a popular product in the bathroom industry.
1. Barrier cannot be activated 1) Check whether the barrage is provided with mains electricity (given city electricity)