When Huasheng Ming Heavy Machinery Factory paid a return visit to the customers who purchased the coal crusher, it was found that many users only knew how to use it without knowing how to maintain it. This was very wrong. Our technical staff of Huashengming Machinery reminded customers that the use of coal mine crusher must be maintained and maintained in order to prevent degradation of equipment performance and reduce efficiency, affecting the use of coal mine crusher. Therefore, regular maintenance of the coal crusher is very important.
Coal mine crusher maintenance is as follows:
1. Periodically check and clean the machine. Clean up the garbage and various parts such as: whether the screws are loose and check the wear and tear of the worn parts such as the teeth, sieves, hammers, etc.
2. Lubrication and maintenance. Fitting cap-type oil cups on bearings is simple and practical. The oil cup lid is usually rotated for a quarter-turn every two hours to allow the grease to be pressed into the bearing. Enclosed bearings are added every 10 days or so. It should be noted that lubricants may deteriorate during long-term use. At this time, the bearings should be cleaned and replaced with new ones.
3. Bearing temperature control. When the equipment is in operation, the bearing temperature must not exceed 40 degrees. If it continues to increase, it is necessary to find out the cause for troubleshooting as soon as possible.
4. The original material has no impurities. It is necessary to carefully clean the original material to be crushed, and it is forbidden to enter the crushing chamber with impurities such as metal and larger stones.
5. Motor speed range. It is usually allowed to differ from the rated speed by 8%-10%. If supporting work with a large power motor, it is necessary to pay attention to controlling the flow of the material evenly, and remember that the feeding speed is uneven.
6. After the machine is running, it is forbidden to approach the person. Ensure that the external surface of the machine is free of debris. If there is any abnormality and the machine shuts down, the standby machine will be fully repaired after it stops.
Huasheng Ming Heavy Machinery Co., Ltd. is adhering to the survival concept of "Always fighting for war, always on thin ice". It is prepared for safety, innovation, advanced technology, excellent manufacturing, and high-quality products to our customers in order to go all the way! Huasheng Ming warmly welcomes customers to visit us and is willing to continue to serve our customers with the needs of modern drying equipment. 13838274368 18737170196

Aluminum Alloy Handle

Aluminum Alloy Handle,Aluminum Alloy Door Handle,Hardware Wire Drawing Handle,Interior Door Handle

Guangzhou Junpai Hardware Co., Ltd , https://www.gdjhfurniture.com

Posted on