Manual Entertainment Hoists,Manual Chain Hoist,1.5Tonne Entertainment Lever Hoists,Manual Hoist Guangdong Gongyou Lift Slings Machinery CO.,LTD , https://www.workmatehoist.com
(l) Before starting the small gasoline generator set, place the speed control handle at the lowest position, open the large choke valve, and pull the engine of the gasoline generator set 4-5 times (when cold weather is needed in winter, pull several times) to make the oil generator set The internal parts are lubricated and the exhaust gas remaining in the cylinder is exhausted.
(2) Open the throttle switch and gently press the oil rod on the small gasoline generator carburetor until the gasoline overflows from the oil inspection hole. However, it is not possible to continuously press hard on the oil test rod to avoid damage to the float.
(3) Appropriate control of the opening of the carburetor choke and throttle. Due to different operating conditions of each model, the choke and throttle opening
The degree is not the same. Normally, the choke valve is generally open at l/2 to 1/4 opening, and the throttle valve is opened at about 1/4 opening.
In short, it is advisable to start the oil generator set easily.
(4) Pull the drawstring a few times, to the compression position (where the resistance is at the maximum), grasp the handle, place one foot on the frame, and the other foot to open one step. Can start. The old-fashioned oil generator sets the starter rope knot on the outer edge of the starter wheel and rotates it clockwise on the starter wheel for 2 to 3 turns. After the starter, the rope is pulled off and the machine is put back into the tool box. The new oil generator set adopts a recovery type pull rope to start, that is, after the handle of the pull rope is started, the pull rope is automatically reduced to the rope groove.