Sliding Gate Hanger Rollers,Sliding Hanger Rollers For Garage Door,Sliding Hanger Rollers For Factory Gate,Sliding Hanger Rollers For Heavy Door Xiamen XMillion Co.,Ltd. , https://www.xmilliondoor.com
Sludge screw pump is a single screw pump, its main working parts are eccentric screw spiral (referred to as the rotor) and the inner surface of the double helical screw bush (called the stator) . Now Xiaobian and introduce the structure of G-type screw pump under the structure. Structural characteristics of G-Sludge Screw Pump Structural drawing Components: 1 discharge chamber; 2 pull rod; 3 screw bushing; 4 screw shaft; 5 universal joint assembly; 6 suction port; 7 joint shaft; 8 packing 9 Gland packing 10 Bearing 11 Bearing cover 12 Motor 13 Coupling 14 Bushing 15 Bearing 16 Transmission spindle 17 Base. G-type single-screw pump due to the special geometry of the two parts, respectively, to form a separate sealed chamber, the media by the axial uniform flow, the internal flow rate is low, the volume remains unchanged, the pressure is stable, and therefore will not produce turbulence and agitation. Because the stator is made of a variety of elastic materials, the pump can not handle the high-viscosity fluid delivery and the transportation of hard suspended particle media or fiber-containing media. Its flow and speed is proportional to. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)