Tile shop is good or bad, has a great relationship with the construction process, so the acceptance after the tile is very important, generally we can see is the appearance of the tile, the acceptance of the tile is nothing more than a few points, whether the paving is neat , whether the porcelain surface scratches and so on. First, check whether it meets the design requirements First of all, check whether the tiles are laid according to the design requirements. For example, if the owner requests a diamond-shaped inclined shop, then it cannot be a horizontal or vertical paving method. In addition to the paving method, check whether the orientation of the tile is correct, whether there is a reversal phenomenon, whether the position of the tile and the waist line is correct, whether there is a misalignment or a height error. Second, check for scratches During the tile laying process, it is easy to scratch or damage the tiles due to careless construction. When it is accepted, it is necessary to first check whether the surface of the tile is scratched or difficult to remove, and whether the brick surface is broken and collapsed. Third, check for cracks Normally, under the condition of natural light exposure during the day, check the brick surface for crack cracks by using eye and hand touch. The crack refers to the cracking of the surface of the brick surface, but the bottom of the tile is intact. The hand touch has a slight feeling of cutting; the crack refers to the cracking of the entire brick surface from the surface to the bottom, and the hand feels a clear cut. Fourth, check whether the gap is even In order to cope with the problem of thermal expansion and contraction of tiles, and to ensure the straightness of the tile-laying effect, it is necessary to leave a seam between the tile and the tile when laying the tile. When checking, it is necessary to check whether the gap in the tile is even and beautiful. Generally, the width of the brick seam is 1mm and cannot exceed 2mm. Special effects can also widen the gap, such as 5mm. In addition, check the tightness of the edge of the tile. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Tile tile project acceptance Metal Polishing Compound wax,Stainless Steel Polishing Compound wax,Car for Polishing Compound,Meguiars Compound Polish,Buffing Compound Cars Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com
