Track Light
LEDER technology's Track light features metal faceted heads that swivel and pivot to direct light where needed and remains cool to the touch when lit. The track light`s base is made using high-quality materials that enable years of utility and durability.
The track light which has classic cylindrical 'can-style' design gets a touch of modern flair with a brushed nickel finish and a slim, contemporary rail. Each light head of this track light is adjustable and easy to adjust, so you can easily brighten up dark corners and dimly lit rooms.
Features:
• Durability design
• Easy to adjust
• Save electricity
• With a rotating lamp cap
• The irradiation direction can be adjusted
• Color temperature :3000k-6000K
• With reliable high performance LED
• Type of protection: IP20
• Warranty:3 - 5 years
Decorative fixed rail cube shaped fixture features reliable high-performance LED. Fits well in applications such as kitchens, retail environments, and anywhere that needs highlighted illumination. The track light is an easy and elegant lighting solution for any room.Except LED Track Light , we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
LED Track Lighting,Track Lighting Lowes,Track Lighting Pendants,Home Depot Track Lighting LEDER LIGHTING CO.,LTD , https://www.lederlight.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>A variety of common bearing problems and causes Various common bearing problems and causes
Large metal noise cause 1: abnormal load; countermeasures: correction cooperation; discussion of bearing clearance; adjustment and load; /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Reason 2: Poor equipment; countermeasures: machining accuracy of shaft and outer casing; improvement of equipment precision and equipment method.
Reason 3: Lack of lubricant or unsuitability; countermeasures: make up the lubricant; pick the right lubricant.
Reason 4: The rotating part has a touch; Countermeasure: Correct the touch of the curved road seal.
Rule noise cause 1: Indentation, rust or scratch caused by foreign matter forming the rolling surface; countermeasures: replace the bearing; remove the relevant parts; improve the sealing equipment; use a clean lubricant.
Reason 2: (after steel carburizing) external deformation; countermeasures: replace the bearing; pay attention to its application.
Reason 3: Rolling surface peeling; countermeasure: replace the bearing.
Irregular noise cause 1: excessive clearance; countermeasures: study cooperation and bearing clearance; correct preload.
Cause 2: foreign matter intrusion; countermeasures: study and replace the bearing; remove the relevant parts; improve the sealing equipment; use clean lubricant.
Reason 3: Spherical injury, peeling; Countermeasure: Replace the bearing.
Abnormal temperature rise causes 1: excessive lubricant; countermeasures: reduce lubricant; excessive use; pick harder grease.
Reason 2: Lack of lubricant or unsuitability; countermeasures: make up the lubricant; pick the right lubricant.
Reason 3: Abnormal load; countermeasures: correct cooperation; discuss the clearance of the bearing; adjust the preload; correct the shoulder orientation of the outer casing.
Reason 4: Poor equipment; Countermeasures: Improve machining accuracy, equipment accuracy, and equipment methods for shafts and casings.
Reason 5: creep of the cooperation surface, conflict of sealing equipment is too large; countermeasures: replace the bearing; discuss cooperation; modify the shaft and outer casing; change the sealing method.
Large oscillation (bounce of the axis)
Cause 1: (after steel carburizing) appearance deformation; countermeasures: focus on bearing replacement operations.
Reason 2: Peeling; Countermeasure: Replace the bearing.
Reason 3: Poor equipment; countermeasures: Correct the right angle of the shaft, the outer shoulder of the shell, and the side of the liner.
Reason 4: foreign matter intrusion; countermeasures: replace the bearing; remove the parts; improve the sealing equipment.
The lubricant leaks too much; the cause of discoloration: excessive lubricant; foreign matter intrusion, foreign matter in the wear powder; countermeasures: excessive use of lubricants; research and conversion of selected lubricants; discussion of bearing replacement;
Recommend to friends comments close window Bearing related knowledge Rolling bearing ball mill hollow shaft, bearing, bearing housing equipment smooth new skills imported bearings world standard magnetic NSK bearing characteristics classification rolling bearing parts production requirements those process rolling bearing heating methods and equipment key
This article links to http://
Please indicate the bearing network http://
Previous:Smooth mechanism of CSB-EPB series bearings Next:Layout and characteristics of slewing bearings
Source: China Bearing Network Time: 2017-10-19