[China Aluminum Industry Net] A method for brazing of aluminum or aluminum alloys in a continuous furnace consisting of a drying chamber, a rising greenhouse, a brazing chamber, a cooling chamber, etc., and melting and solidifying the brazing material on the components. A flux application chamber is provided in the front section of the drying chamber, and a flux generation device is disposed adjacent to the flux application chamber. In the flux generation device, 30 to 46% by weight of AlF is provided. A method for brazing aluminum or an aluminum alloy in a continuous furnace consisting of a drying chamber, a rising greenhouse, a brazing chamber, a cooling chamber, etc., and melting and solidifying the brazing material on the member, characterized in that the above-mentioned drying chamber is The front stage is provided with a flux application chamber, and a flux generation device is disposed adjacent to the flux application chamber, and 30-46 wt% of ALF-[3] powder and 70-54 wt% of K are to be formed in the flux generation device. 3] After the ALF(R)[6] powder is pulverized and mixed to form an aqueous suspension in the presence of water, the concentration of the aqueous suspension is adjusted to a ratio of 5 to 10% of the mixed powder of 95 to 90% of water, and the above flux is applied. It is applied to the aluminum part in the chamber. Power Springs,Conventional Power Springs,Pre-Stressed Power Springs,Power Spring With Housing Ningbo Yunsheng Elastic Components Co.,Ltd , https://www.yunshengsprings.com