The application of biogas fertilizer in the apple orchard can not only satisfy the nutrients needed for fruit tree growth, but also enhance the soil's ability to retain water, protect fertilizer and drought, and enhance the stress resistance of fruit trees, reduce pests and diseases, and improve yield and quality.

1. Biogas fertilizer as base fertilizer

According to the size of the tree, ditch or open the fruit trees, or dig 4-6 pits with a depth of 30-40 cm, apply 2500-3000 kg of biogas fertilizer mixture per acre, mix 50 kg of formula fertilizer, and cover the soil after application. Conditional irrigation can be done, and the soil should be filled in time after the water is infiltrated to ensure fertilizer efficiency and prevent frostbite roots.

The biogas fertilizer is generally applied in the autumn from September to October. Because this is the peak growth of the root system, and the soil temperature is suitable, it is conducive to further decomposition and root absorption of fertilization, increasing the utilization rate of fertilizer. It is also possible to carry out spring application, generally to master "early", and immediately after the soil is thawed, which is beneficial to promoting the growth of fruit tree leaves and improving the quality of flower buds.

2, biogas slurry for root dressing

The application of biogas slurry is beneficial to the growth and development of shoots and leaves, promote flower bud differentiation, increase fruit set rate and enhance fruit growth. Dig 30 cm × 20 cm strip ditch or 20-30 cm deep pit on the outer edge of the canopy, apply about 30 kg of biogas slurry per plant per plant, and cover the soil in time after the biogas slurry is infiltrated.

The biogas slurry is used as a root top dressing. It is usually carried out about 30 days before fruit picking and fruit picking, and it is topdressed 3-5 times a year.

3, biogas slurry for foliar topdressing

Fertilization time. Generally, the canopy is sprayed before the fruit tree enters flowering, after flowering, before flower bud differentiation, during fruit expansion and after fruit picking.

Spray method. The biogas slurry is sprayed separately on the foliar surface. Each plant is sprayed with 20 kg of biogas slurry and sprayed on the canopy. It is sprayed once every 15 days, so that the back of the leaf is soaked but the fertilizer is not dripping.

Foliar sprayed biogas slurry, fast absorption, high utilization rate, can make fruit leaf surface thicker, reduce the occurrence of pests and diseases and enhance the resistance of the tree body, which is conducive to flower bud differentiation, flower preservation and fruit preservation.

4. Effect of applying biogas fertilizer on yield and quality of apple

The application of biogas fertilizer can significantly improve the apple fruit shape index. The fruit surface is smooth and tidy, with few or no spots. The fruit is large, the specific gravity is small, the coloring area is large, the whole red fruit rate can reach more than 90%, and the fruit yield rate is close to 85%. The fruit has a high hardness and a significant increase in soluble solids. In addition, vitamin C, crude protein, crude fiber, etc. in the fruit also increased significantly.

The apple orchard applied by the biogas fertilizer has an increase rate of 5%-12%. The apple orchard to which the biogas fertilizer is applied can increase the income by 900 yuan per mu and the savings of 220 yuan.

Source: Yijun County Rural Energy Office
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

High Speed Door Accessories

About high speed Door Accessories:

1.Driving system: High Speed Door Servo System motor and control, motor SNMA / SEJ +reducer+flang+encoder+control box

2.Other accessories: Middle aluminium bar, bottom aluminium bar, aluminium vertical track, stainless steel vertical track, brushes,round nylon strip, PVC roll, rolling steel tube complete, drum be;;s for rolling tube, side end covers, stainless steel cover, steel tubes, air bag sensor system, safety light beam, Microwave sensor 24 Gigahertz,PVC welding machine, smoke and fire sensors, PVC transparent window, magnetic loop, photocell, remote control, manual push button, sound warning alarm Led lamp traffic light

For some main accessories, here is detain introduction:

1).24G radar sensor:

Brand: Hofic

Technology: Microwave processor

Maintain time: 0.5s

Protection: IP54

Transmitting frequency: 24.125GHz

Maximum installation height: <5meter

Transmitting power density: <5mw/cm2

Power consumption: <1W(VA)

Installation angle: 0-90°(lengthways) -30-30°(crosswise)

Supply voltage: AC&DC 12V-30V

2).Photocell:

Approval CE & ISO9001

Power supply AC/DC 12-30V

Static current 25A

Action current 40mA

Mounting distance Max 10m

NO or NC contact Done by NO./NC. contact selection

Working environment temperature -42℃ to +45℃

Working environment humidity 10 to 90%RH

Appearance dimensions( controller) 123*50*32mm(L*W*H)

Appearance dimensions(Magic eye head) 19*13mm(L*D)

3). Remote control

Operating Voltage: AC220V/50HZ+-20%

Transmit power:≤100mW;Super regenerative module, strong anti-interference

Operating temperature:-30℃-+70℃

Working frequency: 433MHZ;transmitter 1527, millions of encoding chip

Accept sensitivity:≤110dB

Manipulation method: electric remote control

Configure the quantity: Wireless number; factory configuration transmitter two. Can be equipped with PT2272 digital decoder chip

Configure the function: Up, down, stop, anti-lock full-featured reproduction

4). Magnetic loop

Voltage: 12V AC/DC +-10% 24V 115V AC+-10% 230V

Power: <2VA

Continued electrical output: 7A / 250V AC

Frequency range: 20 to 200K Hz

Response time: infinity (factory setting) or adjust maintain time

Sensitivity: 0.01% to 0.1% divided into 3 levels

Protection level: IP30

Electromagnetic compatibility (EMC) Complies with EM50081-1 and EN50082-2

Detection loop inductance: the limit of 40uH to 100uH ideal value 80uH to 300uH

Operating temperature: -25 ℃ to 70 ℃

Storage temperature: -40 ℃ to 85 ℃

Relative humidity: <90% non-condensing

Temperature compensation: automatic compensation up to 50 ℃ / h

Connection type: 11 pin DIN rail socket

Dimensions: 41 * 78 * 85 mm (width * height * length)

Weight: 250 grams

5). manual push button

This exit switch button is made of ABS and has built-in indicator light make it looks more elegant and fashionbale. It can be widely used in public entrance gates, public door, home, office, hotel, etc.

Door Exit Button Push To Exit Switch Door Opener For Access Control Security

Main Feature

Fashionable appearance

Made of ABS Plastic

Easy to install and operate

Used for access control

Specification

Mechanical Life: 500,000 test

Material: Plastic

6). Limit switch encoder

Voltage: DC5V-24V

Output voltage: high voltage≥85%Vcc, low voltage≤0.5V

Maximum mechanical speed:6000rpm

Anti-vibration: 50m/s,10-200HZ,XYZeach way 2 times.

Current consumption:≤30mA

Response frequency: 0-100KHZ

Protection: waterproof,oil proof,dust prevention, IP54

The output code system: binary code

Operating life: MTBF≥30000(+25℃,2000rpm)

Rotational inertia:4.0x10-8kgm²

Maximum load:radial direction20N

Axial direction:10N

Weight: about 0.4kg

High Speed Door Accessories,High Speed Door,Electronic High Speed Door Accessories

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com

Posted on