The importance of the maintenance knowledge that will be understood after the failure of the baler has gone through the importance of the maintenance knowledge that the baler failure will understand. Ptfe Gasket Shelf Life,Ptfe Gasket Temperature,Virgin Ptfe Gasket Datasheet,Ptfe Encapsulated Gasket Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com
The baler is our packaging helper, widely used in many industries. The most difficult thing in the normal production of the baler is that the baler suddenly fails to affect normal production. At this time, you will realize that it is very important to master certain maintenance knowledge. of. Let's get rid of this embarrassment, teach you some maintenance tips and daily considerations.
Safety production precautions:
1. After normal use, check whether the bolts are loose after the shift, or whether the machine has deformation or open welding. If abnormalities are found, repair them in time, otherwise accidents will be conceited.
2. The hydraulic oil of the machine hydraulic system should be replaced or filtered once after the first use, and then replaced or filtered every six months to ensure the normal operation of the system (the fuel tank must be cleaned before refueling). --dy23wl
3. If the packaged material is flammable, fire prevention measures should be strengthened to avoid fire.
4. When the pressure test condition is not available, it is not allowed to remove the lead seal of the reversing valve and adjust the screw of the pressure regulating valve.
5. The pump is not allowed to rotate in the opposite direction, otherwise it will be easily damaged.
6. The box door is not closed or the pressure is strictly prohibited after opening the door, otherwise the piston rod will be bent.
7. When the piston rod is running, it is strictly prohibited to extend into the feed port to feed the head, hand or feed.
Maintenance technology:
1. Before the baler is running, check the components of the strapping machine and the photocells, and ensure that the position of the reflector is correct. There should be no dust on the surface. If the position is biased, even if it needs to be adjusted, if there is dust. Need to be cleaned up.
2. Some parts of the screws that frequently occur displacement and mechanical movement are loose, if necessary, tighten. If there is a missing screw or nut, it needs to be replenished in time.
3. Before running the baler, check the conveyor rail for any debris or foreign objects, which must be removed in time. If there is dust deposit, compressed air can be used to clear the dust. For parts that are frequently displaced, see if you need to add lubricant.
4. When the power is turned on, the baler is found to have large noise and mechanical vibration. The power supply and the machine should be turned off immediately, and the professional treatment of the relevant personnel should be sought to avoid damage to the internal parts of the equipment.
I hope that you will not feel embarrassed when you encounter the glitch of these balers. Swiftly help you get rid of the "squatting" and calmly face the failure of the baler.
Original source link http://
Http://news.chinawj.com.cn Submission: