Hardness indicates the ability of a material to resist the pressing of a hard object into its surface. It is one of the important performance indicators of metallic materials. Generally, the higher the hardness, the better the wear resistance. Commonly used hardness indexes are Brinell hardness, Rockwell hardness and Vickers hardness. 1. Brinell hardness (HB) A certain size (usually 3000kg) of a hardened steel ball of a certain size (typically 10mm in diameter) is pressed into the surface of the material for a period of time. After the load is removed, the ratio of the load to the area of ​​the indentation is the Brinell hardness value ( HB), the unit is kg/mm2 (N/mm2). 2. Rockwell hardness (HR) When HB>450 or the sample is too small, the Brinell hardness test cannot be used instead of the Rockwell hardness measurement. It uses a diamond cone with a apex angle of 120° or a steel ball with a diameter of 1.59 and 3.18 mm, and is pressed into the surface of the material to be tested under a certain load, and the hardness of the material is determined from the depth of the indentation. According to the hardness of the test material, it is represented by three different scales: HRA: It is a hardness obtained by using a 60kg load and a diamond cone indenter for materials with extremely high hardness (such as cemented carbide). 3 Vickers hardness (HV) The surface of the material is pressed into the surface of the material with a load of 120 kg or less and a diamond square cone presser with a apex angle of 136°. The surface area of ​​the material indentation pit is divided by the load value, which is the Vickers hardness value (HV). As can be seen from the above, Vickers hardness is one of the surface hardnesses. It has a conversion relationship with other hardness units. Hardness refers to the surface hardness, and there is no hardness requirement inside the material. Only mechanical properties (tensile strength, yield strength and impact toughness). Why is there no surface hardness in GB/T 3098.1-2000? Does 5.6 not indicate the surface hardness? The surface hardness should not be 30 Vickers hardness (about 3 HRC) higher than the core hardness. The surface of 10.9 level The hardness should not be greater than 390HV0.3. As for the lack of surface hardness, it is a low performance grade, such as 3.6 4.6 4.8 5.6 5.8 6.8, because there is no heat treatment, so there is no requirement, because the hardness of his surface is mainly cold heading or baking turning. The hardness generated by the post stress.
Intelligent Street Lamps are also called intelligent lighting or smart street lights.It adopts the Internet of things and cloud computing technology to comprehensively upgrade the urban public lighting management system, so as to realize centralized control, operation and maintenance information and intelligent lighting of street lamps.The most advanced versions of Intelligent Street Lamps have been designed to create a happy atmosphere in roads, streets, squares and other places.The design of intelligent street lamps can only be designed by a wide range of discussions and environments that provide an aesthetic consistency.
Intelligent street lamp system
The core functions of intelligent street lamp include Intelligent lighting,Smart city applications,The information publishing system,Intelligent security,Charging pile,Distributed monitoring sensor system.
Product feature
1.Sensor
Sensor norise
Air pollution sensor
Temperature/humidity sensor
Brightness sensor
Municipal construction monitor
2.RFID
Special crowed monitor
CMC monitor
Community security monitor
Municipal facilities monitor
3.Communication Services
Micro base station
Street lights embedded WIFI hot spot
4.Video Monitor
Security monitor
Vehicle monitor
5.Emergency Broadcast
Active of the external field radio monitoring center
6.Intelligent Lighting
Cellular cooling technology
Based on the luminance uniformity of light distribution
Intelligent single lamp/center controller
Variety of modular design lamp,holder is optional.
7.Information Release
Advertising exposure
Current politics news
Information release
8.Charging Column
Electric car
Electric bicycle
Intelligent Street Lamp,Street Lamp,Street Lamp Post,Intelligent Lamp Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com
HRB: It is a hardened steel ball with a load of 100kg and a diameter of 1.58mm. The hardness is used for materials with lower hardness (such as annealed steel, cast iron, etc.).
HRC: is the hardness obtained by using a 150kg load and a diamond cone indenter for materials with high hardness (such as hardened steel).
When testing the hardness of the bolt, there is no heat-treated bolt. It is only necessary to make the surface hardness within the acceptable range. If it is a heat-treated bolt, it should be hardened on the surface without cutting a diameter. The hardness test is 1/2R on the surface. Where the hardness meets the standard.
It has a core with a surface, and the surface refers to the hardness after using the Vickers or the surface Rockwell after removing the surface rust, etc., and the core is to be removed from the surface and the core after removing the 1/2 diameter portion of the portion. 2 places hardness, the difference between the two hardness can not exceed 30 HV, the surface is higher than 30HV indicating that the surface is carburized, it is not allowed, if the surface is lower than 30HV, the surface decarburization is not allowed. Look carefully at this 3098. 1
