Borui Shuangjie provides epoxy resin grout masterbatch, one ton of resin can be adjusted with 7 tons of resin grout

First, the scope of application:                                                                                   

1. Secondary grouting installation of high-vibration equipment such as compressors, pumps, punching machines, crushers, and ball mills.

2. Grouting in the base area of ​​equipment susceptible to chemical attack.

3 , the track foundation, bridge support and other areas are subject to strong pressure grouting.

4 , anchor bolts, steel planting and building structure concrete reinforcement.

5. Concrete, stone, steel, wood and other surfaces are used as self-leveling mortar.

6. Steel connection of iron, iron tie rod and tie rod.

Second, product features:                                                                                   

1. High strength and early strength: It can provide mechanical properties such as compression resistance and bonding, which are much better than cement-based materials, and higher early strength.

2 , low exothermic peak: can provide up to 120 minutes ( 25 °C) operating time , suitable for large volume grouting .

3. No shrinkage: ensure that the grouting layer is completely in contact with the bearing surface after final forming, ensuring high precision of equipment installation.

4 , 4, excellent creep resistance: epoxy grout can be used for a long time under the harsh physical conditions of -50 °C to +80 °C under freezing and thawing, vibration and compression without plastic deformation, ensuring long-term accurate positioning of equipment .

5 , excellent toughness: Epoxy grout can resolve any dynamic load transmitted by the moving equipment that may cause the cement-based grout layer to burst.

6. Corrosion resistance: It can withstand long-term corrosion of chemicals such as acid, alkali, salt and grease.

Third, the performance indicators:                                                                                   

Note:

1. Preheating, forming and curing are carried out under the experimental conditions of 23 ± 2 °C and relative humidity of 50 ± 5% . Other conditions are carried out according to the corresponding standards.

2. The final data was measured and cured at 23 ± 2 °C for 7 days, and then accelerated at 60 °C for 6 hours.

Fourth, storage packaging                                                                                      

1. The epoxy grout can be stored for at least 18 months at room temperature and under dry conditions .

2 , according to the mix ratio A: B: C = 25 kg: 10 kg: 150 kg

Borui Shuangjie provides epoxy resin grout masterbatch, one ton of resin can be adjusted with 7 tons of resin grout