kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com
The problems of LCD splicing to some extent hindered the pace of its development. For example, in an oversized project, the LCD splicing economical unit size is 46 inches, and DLP has 50, 60, 67, 80 inches and Other different specifications to choose from, which leads to the realization of the same size display screen, LCD splicing unit number A lot more than DLP products also means that a greater number of seams are produced, and at the same time the required processor performance requirements are also higher.
In order to solve these problems, and in order to allow LCD splicing to provide users with a better splicing experience, splicing vendors continue to work hard. After several years of development, the liquid crystal splicing has undergone significant changes both in the patchwork and in the size of the unit.
Splicing gaps, in the efforts of businesses, the joints of LCD splicing products continue to decrease, from the beginning only Samsung 7.3mm and 6.7mm splicing unit, Sharp 6.5mm, LG 6.3mm splicing unit, and then to Samsung With the just-launched 5.5mm splicing product, the stitching of the LCD splicing has been significantly changed. In terms of the size of the unit, LCD splicing has also been more diversified, and these two points have been fully reflected in the just-concluded 2011 InfoComm China exhibition.
For example, at this year's InfoComm show, at Samsung's booth, the author saw that in addition to the 46-inch splicing unit, Samsung also highlighted its new 55-inch splicing unit with a 5.5-mm seam, successfully breaking through the LCD display. The border of the device is limited. From the launch of LCD splicing in 2008, UT is the ultra-vision seamless liquid crystal splicing product introduced in 2009, and this year the second-generation 55-inch splicing wall product with a bezel of only 5.5 mm is introduced. Along the way, Samsung has led the LCD splicing market. development of.
The introduction of a new 55-inch splicing unit has expanded the panel size while reducing patchwork. This not only means a reduction in the number of splicing, but also eliminates the sense of separation caused by multi-screen splicing and allows video The effect is more perfect. It is thanks to the splicing gap once again reduced, the listing of Samsung 55-inch splicing unit has attracted many businesses have followed up, the market has also emerged patchwork for 5.5mm LCD splicing products, once again in the splicing market set off a LCD Splicing boom.
Not only that, in fact, in terms of LCD splicing, in addition to Samsung's DID panel, Sharp also introduced a 60-inch unit using 10-generation wire-cutting to achieve a 6.5mm seam slit, larger unit size, making the overall mosaic seam occupy The display area has been reduced. In addition, the LG patchwork stitching unit with a 6.3mm stitch is a good choice. The emergence of these LCD splicing products with different sizes and different seams provides users with more choices. In addition, the appearance of large-size panels has played a good role in promoting the overall visual effect of the video wall.
Liquid crystal splicing products have developed extremely rapidly in recent years, and are recognized by more and more end-users for their superior display performance, strong environmental adaptability and long service life. With the emergence of more splicing products of different sizes and different seams, a wider market demand will inevitably be triggered, which will drive the LCD splicing market into the next round of rapid development.
After several years of rapid development, LCD splicing has been widely recognized by the market due to its many advantages. With the many advantages LCD splicing itself has, in just a few years, LCD products accounted for as much as one-fifth of the market. Even so, the problems with LCD splicing are undeniable, such as its patchwork, its unit size, and so on.