Under Vehicle Inspection System,Under Vehicle Monitor System,Under Vehicle Surveillance System Walk Through Metal Detector CO.,LTD , http://www.nsmetaldetector.com
1, the gate area. A super-wide dynamic network camera is installed at the entrance and exit of the gate to monitor the situation of people entering and leaving the bank. At the same time, two high-definition network cameras have been set up across the gate to monitor the financial escort vehicles in real time. The large-area monitoring and installation of all-in-one network domes outside the door area enables 360-degree inspections. In case of an emergency situation, it can be combined with a fixed camera to automatically track suspicious targets.
2, trading area. Set high-definition internet domes in the trading floor to achieve high-definition surveillance of the entire area; set high-definition web cameras with external pickups in the counter area to achieve high-definition surveillance of the entire transaction process and customer facial features. In the waiting area, large customer area, queuing area, and Erdaomen area, network cameras need to be set up to monitor the conditions of the area and the people entering and leaving the area.
3, vault, safe area. In these areas, a network camera with low illumination or infrared function is set according to the environment, so as to continuously monitor these areas for 24 hours.
4, monitoring room, duty room. Set up the network hemisphere to supervise the attendance of the on-duty personnel.
5. Entrances and exits to the financial building. In all entrance halls, including fire exits and exits, it is necessary to install a network (hemisphere) camera to monitor the entrance and exit conditions.
6. Inside the financial building. The internal pedestrian paths, stairways, elevator halls, rest areas, elevator cars and other parts of each floor are required to install network (hemisphere) cameras to meet the requirements of no dead zones and no blind spots. For other building sites, it is recommended to install a network (hemisphere) camera in the main channel to monitor the flow of personnel and ensure full coverage of video surveillance.
7, Finance Building underground garage entrance. Install a high-definition gun-type network camera at the entrance and exit of the underground garage. One camera per lane is required. To avoid backlighting, it is required to face the garage, and the camera is required to have strong light suppression. An HD network camera is installed at the entrance to the ground floor of the underground garage to monitor the status of people entering and leaving the garage and building.
8, Financial Building underground garage internal traffic roads. The network of fixed-line low-light cameras is installed on the main vehicle lanes and pivot points to meet the monitoring needs of low ambient illumination in the basement, and all basement cameras are required to enable continuous tracking of vehicles in the garage.
9. The installation of the camera at the primary and secondary entrances on the first floor of the financial building shall be kept in the same direction, for example, both inside and outside, to ensure that personnel entering or exiting the building will eventually have an image of the entrance and exit to monitor his (her) face. The elevator car camera should be installed at the corner of the entrance door, covering the entire car, and the floor display must be configured, or anti-jamming devices must be equipped to suit the special environment in which the elevator operates.
10. All cameras should be installed to avoid back light unless special countermeasures are taken. Match the lens and shield with the (HD) camera to avoid the occurrence of double the effectiveness. All areas monitored by cameras must have suitable lighting to meet the video surveillance requirements. The entrance and exit lighting of vehicles in a special underground garage must be able to better cooperate with the camera and really play a strong light suppression effect.
Intelligent video analysis monitoring point settings
1. Face and face recognition: A face recognition special device is installed at the financial transaction counter, and face recognition software is configured in the background. The purpose is to identify people who are queuing up through the face recognition and are not suspects of the authorities.
2. Traffic statistics: A network camera is installed above the entry point of the financial transaction hall and bank processing area, and analyzed through background software. The intelligent analysis module in the video system management software can analyze the screen captured by the front-end camera. The number of people entering or leaving a specific area is automatically calculated for the user, thereby counting the number of persons or objects crossing the entrance or the designated area.
3. Defective detection: A fixed bolt is set in the financial building wall and outdoor area of ​​the bank and in the parking lot. It is used to detect whether any personnel are paralyzed in this area.
4. Protection of ATM counters: Set up dome cameras in ATM teller halls, pinhole camera of ATM counters itself, and configure behavior rules through background software to realize intelligent protection for ATM counters: such as face detection, traffic detection, and legacy detection. Strenuous exercise detection, installation of equipment detection, ATM advertising small ads, face camouflage alarm, video surveillance abnormal alarm and other functions.
Video monitoring point settings