Why didn't the floor get sick soon? For those who are sick, they must be able to find the right reason to be able to prescribe the right medicine. For the same floor, any kind of pathology that appears on the floor will cause different incentives. Not only should we learn how to cure diseases, but we must also take warning and protect more after we cure them. The main reason for discoloration and discoloration of solid wood flooring (vegetal plates) is that the back of the floor is exposed to moisture for a long time, and water penetrates into the floor, causing moldy discoloration and even corrosion. Deformation of the floor includes cracks, crevices, arches, concaves, etc. The reason for the arching is that due to the damp, the floor bulges and arches, and severely, the arches of the two floors are arched and the horizontal cracking occurs. The gap is due to the high water content of the floor, and the maintenance time before laying is not enough. After laying, evaporation of water in the floor results in shrinkage, resulting in a large gap between floors. In addition, floor processing accuracy is not enough, there is a phenomenon of size, or long-term empty after laying, sun exposure, improper use of air conditioning can cause floor deformation. Solid wood flooring (paint plate) paint, explosion paint, deformation. The phenomenon of paint lacquer on the floor paint surface is related to the coating paint processing technology. The explosion paint is due to the high moisture content of the floor, and the floor surface shrinks and causes the paint surface to burst. The most deformed paint floor is the appearance of corrugated and wave-type phenomenon. The reason is that the moisture content is too low when the floor is laid. When the moisture expands, the two sides of the floor are curled up. If the floor is too tight or the span is too large or too long, the situation is comes out often. After a solid wood floor is laid, a sound may appear. After a solid wood floor is laid, noise may appear. However, after a period of time, the noise should gradually disappear. However, in the following situations, the sound may not be easily eliminated. Floor and floor wood grille are not flat, resulting in the seaming of floor outlets; the diameter of the drill bit is larger than the floor nail diameter when the floor is laid, resulting in loose nails in the floor, or in the wooden grille. The tolerances and distortions of the floor trays are not up to standard or distorted; the floor is not laid tightly with the wooden grille; the floor is laid too tight; the laying time is too short to put into use. Floor paint 
Bedford Floor
Links: Decoration to be careful to lay the floor to prevent the decoration of the curtain