The fluid tube is a steel tube with a hollow section, from head to tail, without welds. The use of steel pipes to manufacture ring-shaped parts can improve material utilization, simplify manufacturing processes, save materials and processing man-hours, such as rolling bearing rings, jacks, etc., and have been widely used in steel pipes. Steel pipes are also indispensable materials for various conventional weapons, and barrels, barrels, etc. are all made of steel pipes. Steel pipes can be divided into round pipes and shaped pipes according to the shape of the cross-sectional area. Since the area of ​​the circle is the largest under the condition of equal circumference, more fluid can be transported by the circular tube. First, the fluid pipe manufacturing method 1 The general boiler tube use temperature is below 450 °C, and the domestic tube is mainly made of 10 or 20 carbon steel hot rolled tube or cold drawn tube. 2 High-pressure boiler tubes are often used in high temperature and high pressure conditions. Under the action of high temperature flue gas and water vapor, the tubes will oxidize and corrode. Steel pipes are required to have high durability, high corrosion resistance and good structural stability. Second, the fluid pipe specifications Fluid tube Specifications and specifications 12×189×4.5-8-10-12-14-16-18-20245×25-28-30-34-40 14×1.5-2.5-395×4.5-6-8-10-12-14-16-20273×7-9-12-15-18-20-25 16×1.5-2.5-4102×4.5-5-6-7-8-10-12-14-16-20273×30-35-38-40-45-50 18×2.3-4-5108×4.5-5-6-7-8-10-12-14-18-20-22299×8-12-16-20-24-28 20×2.5-3-5114×4.5-5-6-7-8-10-12-14-18-20299×30-32-36-38-40-45 24×2.5-3-4-5-6121×4.5-5-6-7-8-10-12-14-16-20325×8-12-14-18-38-42 25×2.5-3-4-5-6127×4.5-5-6-7-8-10-12-14-16-20325×28-32-34-38-42 28×3-3.5-4-5-6133×4.5-6-8-12-14-16-18-20-25-30351×10-16-20-25-40 32×3.5-4-5-6-8140×5-6-7-8-9-10-12-14-16-20-22355×6-18-20-25-30-40/52 34×4-5-6-8146×4.5-6-8-12-14-16-18-20-25-30377×8-12-15-20-24-28 36×3.5-5-6-8152×4.5-6-8-12-14-16-18-20-25-30377×30-37-40-45-50 38×4-5-6-7-8-9-10159×4.5-6-10-12-14402×10-15-20-25-30-35 39×3.5-5-8-10159×16-18-20-22-25-30406×10-20-25-28-35-40 42×3.5-4-5-6-7-8-9-10168×8-10-12-14-20-25-30-35426×10-12-14-16-20-25-30-35- 40 45×3.5-4-5-6-7-8-9180×8-12-16-25-30450×10-12-14-16-20-25-34-40-50 48×3.5-4-5-6-7-8-9-10180×32-34-38-40-45-50480×10-12-14-16-18-20-25-30-40 51×3.5-4-5-6-7-8-9-10194×6-8-12-16-20-25-30-40-45-50500×10-12-14-16-20-25- 34-40-50 56×3.5-4-5-6-7-8-9-10203×6-7-10-15-20-25-30510×10-12-14-16-20-25-34-40-50 57×3.5-5-6-7-8-9-10-12203×32-36-40-45-50530×10-12-14-16-18-20-30-40 60×3.5-4.5-5-6-7-8-9-12-14219×6-8-12-16-18-20-25560×10-14-16-20-25-30-40-50- 60 63×3.5-4.5-5-6-7-8-9-10-12-14219×30-40-45-50-55580×10-14-16-20-30-40-50-70 68×4-4.5-5-6-7-8-9-10-12-14-16219×55-58-60-65-70600×10-14-18-25-20-30-50-60 70×4-4.5-5-6-7-8-9-10-12-15-16245×8-10-14-17-20-22610×10-14-18-25-20-30-50- 60 73×4-4.5-5-6-7-8-9-10-12-15245×25-28-30-34-40620×14-20-30-35-45-50-60 76×4-4.5-5-6-7-8-9-10-12-14273×7-9-12-15-18-20-25630×10-20-30-40-55-75 Third, the use of fluid tubes 1 General boiler tubes are mainly used to manufacture water-cooled wall pipes, boiling water pipes, superheated steam pipes, superheated steam pipes for locomotive boilers, large and small smoke pipes and arch brick pipes. 2 High-pressure boiler tubes are mainly used to manufacture superheater tubes, reheater tubes, air guiding tubes, main steam tubes, etc. for high-pressure and ultra-high pressure boilers. However, the round pipe also has certain limitations. For example, under the condition of being bent by the plane, the round pipe is not as strong as the square and rectangular pipe, and some agricultural machinery skeletons, steel wood furniture, etc. are commonly used square and rectangular pipes. Shaped steel pipes of other cross-section shapes are also required depending on the application. Fourth, the difference between welded pipe and fluid pipe The standard for welded steel pipe for low-pressure fluid transportation is GB/T3091-2001, the standard for seamless steel pipe for general structure is GB/T8162-1999, and the standard for seamless steel pipe for fluid transportation is GB/T8163-1999. The details can be seen in the standard, the fluid can be used as a structural tube, but the structural tube cannot be used as a fluid tube. The surface of the fluid tube is better. Solder For Stainless Steel,Pen Tube Hand Soldering,No Flux Soldering Steel,Solder Stainless Steel Solid NINGBO XIHAN TIN SOLDER CO.,LTD. , https://www.soldertop.com