[China Aluminum Network] Up to the end of 2012, China's aluminum hot-rolled rough-finishing rolling production line can reach 4 production lines, with a total production capacity of 1060 kt/a, becoming a global production line of such a large number of production capacity and greater production capacity s country. The (1+1) production line of Xishun Aluminum Foil Co., Ltd. is provided by SMS Siemag, and it is at an advantageous level in terms of installed capacity. Its production capacity is also relatively large in the world, and its production capacity is entirely likely to reach 320kt/a. This year's production is likely to reach 150 kt, and it is rare to achieve production. There are still three or four hot-roughing-finishing lines under construction and planning. Brief Introduction of (1+1) Hot Coarse Finishing Line Enterprise type rough-finishing mill specifications mm Manufacturer hot strip capacity kt/a Production year Southwest Aluminum (Group) Co., Ltd. (1+1) 2800 China, 1 280 1989 Chinalco Henan Aluminum Processing Branch Luonan Hot Rolling Mill (1+1) 2400 China, Luoyang Design Institute 250 2007 Xiamen Shunshun Aluminum Foil Co., Ltd. (1+1) 2450 SMS Siemag 280 2010 Northeast Light Alloy Co., Ltd. (1+1) 2100 China, VAI 1 250 2012 Total: 4 Article 1060 Note: 1 The roughing mill was designed by China National Color Technology Co., Ltd., a subsidiary of the Luoyang Nonferrous Metals Processing Design and Research Institute in China. It was manufactured by a number of companies and the finishing mill was imported from the Austrian Iron and Steel Association (VAI). 2 Southwest Aluminium Processing Co., Ltd. is building a large (1+1) hot-rolling line around the world, roughing mill 4100mm, finishing mill 3100mm, imported from SMS Siemag, and put into operation at the end of 2013. The slab is one of its leading products, with a production capacity of about 50kt/a and a coil production capacity of 200kt/a, which is not counted in this table.
The installation of the countertop basin is easy, as long as the hole is opened on the countertop. There are a variety of sink edge designs for over-counter basin sink styles to choose from. It is necessary to ensure that the connection gap between the sink and the countertop is uniform, and there is no water seepage.
Topmount Sink,Top Mount Farmhouse Sink,Top Mount Stainless Steel Sink,Top Mounted Wash Basin JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiaogroups.com