Automatic Sample Impact Notch Machine Automatic Sample Impact Notch Machine,Sample Notching Machine,Notching Machine Blades,Notching Prototyping Machine Dongguan Best Instrument Technology Co., Ltd , https://www.dgbestinstrument.com
The main maintenance work has the following contents:
(1) Choose a suitable use environment. The operating environment of the CNC lathe (such as temperature, humidity, vibration, power supply voltage, frequency and interference) will affect the normal operation of the machine tool. Therefore, the installation conditions and requirements specified in the machine tool specification should be strictly implemented when installing the machine tool. In the case of economic conditions, CNC lathes should be installed separately from ordinary machining equipment for easy maintenance and repair.
(2) Specialized personnel should be equipped with CNC system programming, operation and maintenance for CNC lathes. These personnel should be familiar with the mechanical, numerical control system, high-voltage equipment, hydraulic pressure, air pressure and other characteristics of the machine tool used, the use environment, processing conditions, etc., and can correctly use the CNC lathe according to the requirements of the machine tool and system manual.
(3) Clean up in time. Such as the cleaning of air filters, electrical cabinets, cleaning of printed circuit boards.
(4) Inspection of the machine cable, mainly check the moving joint of the cable, whether the contact is bad at the corner, disconnection and short circuit.
(5) Some of the numerical control system's parameter memory uses CMOS components, and the stored content is maintained by the battery when the power is turned off. In the event of a low voltage alarm, the battery must be replaced in time, and must be carried out while the control system is powered on, otherwise the storage parameters will be lost, resulting in the CNC system not working.
(6) Long-term maintenance of CNC lathes is not required. When the CNC lathe is idle, the CNC system should be energized frequently, and it will run empty when the machine is locked. In the rainy season with high air humidity, it should be energized every day. The heat of the electrical components itself is used to drive away the moisture in the CNC cabinet to ensure the stable and reliable performance of the electronic components.
Abstract The main content of routine maintenance of CNC machine tools: the daily maintenance of CNC machine tools, requires maintenance personnel not only have knowledge of machinery, processing technology and hydraulics, but also knowledge of electronic computers, automatic control, drive and measurement technology. To fully understand,...
The main content of cnc CNC machine tool daily maintenance: daily maintenance of CNC machine tools, requires maintenance personnel not only have knowledge of machinery, processing technology and hydraulics, but also knowledge of electronic computer, automatic control, drive and measurement technology. Comprehensive understanding and mastering of CNC lathes, and timely maintenance work.