Kitchen Sink Faucets,Touch Kitchen Faucet,Retractable Kitchen Faucet,Black Steel Hose Faucet Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucets.com
Diamex.Srl, Italy, has introduced a thin diamond saw blade for group saw cutting. It is called Millennium. It is said that this saw blade has low noise, low vibration, large cutting amount and can reduce the total amount. Production costs. Diamex.Srl has been continuously researching and testing to successfully develop this new saw blade and bring it to market. This saw blade uses carbon fiber to strengthen the substrate, and since the base of the saw blade is thin, the saw blade has a narrower width. Diamex.Srl was founded in 1979 and has extensive experience in the production of diamond tools. The new set of saw blades is mainly used for cutting hard stone plates, especially granite plates, and has been patented in international industry. After a large number of field tests, the main performance data is included in the table. The comparison between the new Millennium saw blade and the common saw blade. Diamex.Srl claims that the saw blade with the "thin blade technology" incorporated into the saw blade design has better performance in stone processing. It can be seen at a glance from the comparison of the data in the table. The data in the table is the data obtained by cutting the grade 3 granite on the industrial standard group saw sawing machine. The saw blade has a diameter of 1200mm, the maximum depth of cut is 40cm, and the average size of the granite is 25×1.8. × 1.9 (8.1 m3). Compared with ordinary saw blades, the advantages of this new Millennium saw blade are: reduced noise, reduced power consumption (19.4% and 23.3%, respectively), and greater cutting power in use, which reduces the saw The vibration of the piece. Another major improvement is the increase in sheet production. The narrow width of the cutter head means that more saw blades can be installed on the sawing machine, and 53 saw blades can be installed, while the ordinary saw blade can only be installed with 50 blades, so that more plates can be cut. In the comparative test, the output of this saw blade cutting material increased by 3.31 m2/m3 - equal to 6%. Other advantages are that the labor, equipment maintenance, depreciation, and stone chip cleaning costs are reduced by 6%. All the savings from cutting with the Millennium saw blade can be seen from the increase in the number of plates in Table 12. Out, the plate cut with the ordinary group saw blade is 10,500 m2, while the plate cut with the Millennium set saw is 11,130 m2, which is 630 m2 more than the ordinary saw blade. According to the current sales price of each set of saw blade cutting plate 15 Calculated by EUR/m2, the result is 630×15=9450 Euro, which is far beyond the value of more than 3 saw blades. The new saw blade has the same cutting parameters as a normal saw blade.