• Model NO.: AAC Conductor
  • Insulation Material: Bare
  • Conductor Type: Standard
  • Application: Overhead, Construction, Power Station
  • Shipment Terms: Fob CNF CIF
  • Transport Package: Wooden Drum or as Request
  • Origin: Yueqing, Zhejiang, China
  • Conductor Material: Aluminum
  • Material Shape: Round Wire
  • Type: Bare
  • AAC Conductor Voltage: Low Voltage, Medium Voltage, High Voltage
  • Trademark: RE
  • Specification: 10-1500mm2
  • HS Code: 7326909000
AAC, AAAC, ACSR, ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels. Since they have such good characteristics as simple Construction, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical textures exist.
1. Specification: 
(1) all aluminum conductor (AAC)
(2) all aluminum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR) 
(4) anti-corrosion type ACSR 
(5) aluminum conductor aluminum clad steel reinforced(ACSR/AW)
(6) rare earth aluminum conductor steel reinforced(ACSR/RE)
(7) aluminum conductor aluminum alloy reinforced(ACAR)
2. Elative manufacturing standards: IEC83, IEC1089, 31, B232, BS215, DIN48204.
1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182. 
2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized steel wire(s) with aluminum wires surrounded by one or more layers of helically. Greased ACSR can also be supplied. 
3). Application: ACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels.
All Aluminum Conductor(AAC)& Aluminum Conductor Steel Reinforced(ACSR))for ASTM (AAC, ACCR, AAAC, ACSR) Generally Confirming to IS 398 (Part-I, II, IV), IEC-228 
(AAAC) Conductor as per ASTM-B-399-1992 
(AAAC) Conductor as per BS-3242-1970 
(AAAC) Conductor IS: 398-IV-1994 
(ACSR) as per ASTM-B-233-1992 
(AAC) as per BS-215-1-1970 
(AAC) as per IS-398-1: 1976 
(AAC) as per ASTM-B-231-1990 
(ACSR) as per IS: 398-II: 1976 & IS: 398-V: 1992 
(ACSR) BS-215-II-1970 
(AACSR) as per IEC-1089-1191 
AAC(All aluminum conductor) are suited for overhead power line. 
We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied. 
3. Applications
Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing capacity. 
ACSR or ACSR cable or ACSR conductor used for overhead electrical distribution and transmission lines for distributing power. 
4. Construction
Aluminum alloy 1350-H-19 wires, concentrically stranded about a steel core. Core wire for ACSR is available with class A, B, or C galvanizing; "aluminized" aluminum coated (AZ); Or aluminum-clad (AW). Additional corrosion protection is available through the application of grease to the corer or infusion of the complete cable with grease. 
Specifications: 
ACSR bare conductor meets or exceeds the following ASTM specifications: 
B-230 Aluminum Wire, 1350-H19 for Electrical Purposes 
B-231 Aluminum Conductors, Concentric-Lay-Stranded 
B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR) 
B-341 Aluminum-clad Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AW) 
B-498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) 
B-500 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
ACSR Conductor IEC61089
Code Number Stranding&Wire Diameter Approx Sectional Area Approx Weight Breaking Load DC Resistance
Overall
Al Steel Diameter Al Steel Total
mm mm mm mm 2 mm 2 mm 2 Kg/km KN Ohm/km
16 6/1.84 1/1.84 5.53 16 2.67 18.7 64.6 6.08 1.7934
25 6/2.30 1/2.30 6.91 25 4.17 29.2 100.9 9.13 1.1478
100 6/4.61 1/4.61 13.8 100 16.7 117 403.8 34.33 0.2869
125 18/2.97 1/2.97 14.9 125 6.94 132 397.9 29.17 0.2304
160 18/3.36 1/3.36 16.8 160 8.89 169 509.3 36.18 0.18
250 22/3.80 7/2.11 21.6 250 24.6 275 880.6 68.72 0.1154
400 54/3.07 7/3.07 27.6 400 51.9 452 1510.3 123.04 0.0723
450 54/3.26 7/3.26 29.3 450 58.3 508 1699.1 138.42 0.0643
500 54/3.43 7/3.43 30.9 500 64.8 565 1887.9 153.8 0.0578
560 54/3.63 19/2.18 32.7 560 70.9 631 2103.4 172.59 0.0516
630 54/3.85 19/2.31 34.7 630 79.8 710 2366.3 191.77 0.0459
710 54/4.09 19/2.45 36.8 710 89.9 800 2666.8 216.12 0.0407
800 72/3.76 7/2.51 37.6 800 34.6 835 2480.2 167.41 0.0361
900 72/3.99 7/2.66 39.9 900 39.9 939 2790.2 188.33 0.0321
AAC Conductor IEC 61089
Code Number
(No.)		 Area
(mm²)		 No. Of
Wires
(No.)		 Diameter
(mm)		 Linear Mass
(kg/km)		 Rated Strength
(kN)		 D.C.
Resistance
(Ω/km)
Wire Conductor
10 10 7 1.35 4.05 27.4 1.95 2.8633
16 16 7 1.71 5.12 43.8 3.04 1.7896
25 25 7 2.13 6.40 68.4 4.50 1.1453
40 40 7 2.70 8.09 109.4 6.80 0.7158
63 63 7 3.39 10.2 172.3 10.39 0.4545
100 100 19 2.59 12.9 274.8 17.00 0.2877
125 125 19 2.89 14.5 343.6 21.25 0.2302
160 160 19 3.27 16.4 439.8 26.40 0.1798
200 200 19 3.66 18.3 549.7 32.00 0.1439
250 250 19 4.09 20.5 687.1 40.00 0.1151
315 315 37 3.29 23.0 867.9 51.97 0.0916
400 400 37 3.71 26.0 1102.0 64.00 0.0721
450 450 37 3.94 27.5 1239.8 72.00 0.0641
500 500 37 4.15 29.0 1377.6 80.00 0.0577
560 560 37 4.39 30.7 1542.9 89.60 0.0515
630 630 61 3.63 32.6 1738.3 100.80 0.0458
710 710 61 3.85 34.6 1959.1 113.60 0.0407
800 800 61 4.09 36.8 2207.4 128.00 0.0361
900 900 61 4.33 39.0 2483.3 144.00 0.0321
1000 1000 61 4.57 41.1 2759.2 160.00 0.0289
1120 1120 91 3.96 43.5 3093.5 179.20 0.0258
1250 1250 91 4.18 46.0 3452.6 200.00 0.0231
1400 1400 91 4.43 48.7 3866.9 224.00 0.0207
1500 1500 91 4.58 50.4 4143.1 240.00 0.0193
----------------------------------------------------------------------------------------------------------------------------------------------
Our Services
1. Rich experience in OEM and ODM
2. Excellent One-stop service
3. High Quality Precision Customized forging & Casting services
4. The lowest price
5. Strict quality control
6 We can manufacture it according to customers requirements.
-------------------------------------------------------------------------------------------------------------------------
 FAQ:

Q1: How is the Design & Engineering
 A: Experienced and skilled team of designers including CAD designers and 3D designers has the capacity to deliver outstanding designs for your project.
     If you require more complex engineering of structures such as overhead transmission and distribution lines design,we can also provide this service also designer fee.
 
Q2: What's the payment term?
 A: We accept T/T, L/C, West Union, Cash.
 
Q3: What's the delivery time?
 A: Usually 2-4 weeks. Or according to quantities 
 
Q4: What's the standard of package?
 A: Export standard package or special package as the requirement of customers.

Q5: What kind of product quality your factory offer?
 A: Our products with both excellent quality and competitive price. And we offer free sample for your reference.
  
Q6: Where is your mainly market?
  A: We mainly ship to South America, North America, Africa , Asia, etc.
 
Q7: What kind of certificate you have?
 A: We have ISO9000, DAS 
 
-----------------------------------------------------------------------------------------------------------------
Dear Customer, Please feel free to contact me, Hope we can establish good business relationship,thanks!
 
 

Outdoor Ball Lights

Sichuan Kangruntengpu Photoelectric Technology Co., Ltd. , https://www.kangruntoplighting.com

Posted on