Paving wood flooring is an important part of home improvement. Workers' paving is not standardized. It is difficult for laymen to understand. Therefore, here are some technical guidelines for paving specifications and paving. 1. Specification for paving wood floors The environment of the paving wood floor requires the completion of the renovation of the ceiling and interior walls. Windows, doors and glass are all installed. The indoor wall has been drilled and the bottom board has been fitted with a wooden mold with a skirting board. The distance and position of the wooden mold are accurate. The operating procedures of the wood floor solid paving method are: grassroots cleaning → bombing, leveling → drilling, installing embedded parts → installing wool flooring, leveling, planing → nailing floor, leveling, planing → nailing baseboard → planing , Grinding → Paint. The operating procedures of the wooden floor empty shop method are: grassroots cleaning → elastic line → drilling pre-paving installations → ground moisture-proof, waterproof treatment → paving wood keel → pad insulation layer → elastic wire, nail mounted wool floor → leveling, planing Flat → nail wood floor, leveling, planing → loading skirting board → planing, sanding → paint. The quality requirement of wood floor pavement is: The surface layer is planed and smoothed, no planing marks, russia and burrs are visible, and the pattern is clear. The floor paving direction is correct, the gaps in the seams are tight, the joints are staggered and the surface is clean. The color of the clear oil surface is uniform, the surface is smooth, there is no curling drum, and there is no empty drum sound when walking closely with the skirting board seam. Padding according to standard procedures can meet the quality requirements. 2. The technical essentials of wood floor construction Wood decking is a highly professional construction project. In addition to operating in accordance with the standard procedures, wood floor pavements need to pay attention to the following specific issues: (1) After all the wooden floors have been transported to the construction site, they should be unpacked and stored in the room for more than one week so that the wooden floor can adapt to the temperature and humidity of the room before paving. (2) Wood flooring should be selected before laying out, rejecting defective products with obvious quality defects. If the paving pattern with the same color pattern is installed in the same room and there is a slight quality defect that does not affect the use, it can be placed on the bottom of furniture such as a bed or cabinet. The thickness of the same room must be the same. At the time of purchase, it should be purchased at the expense of an increase of 10 in actual paving area. (3) The keel of paving wood floor should use pine, fir and other non-deformable tree species, and the back of wooden keel and skirting board should be treated with antiseptic. (4) Paving solid wood floors should be avoided under heavy rain, rainy weather and other climatic conditions. It is best to keep the indoor temperature and humidity stable during construction. (5) The wooden floor in the same room should be finished at one time. Therefore, sufficient auxiliary materials should be provided, and the finished product should be protected in time to prevent oil pollution, fruit juice and other contaminated surfaces. The glue that has been squeezed out during installation must be wiped off in time. Nature Flooring Del Floor Room Paint Interior Decorating Glass Home Furnishing Glass Furniture Glass Doors 1.cylindrical milling cutter End Mill,Roughing End Mill,Carbide Square Drill Bit,Coating Machine Tools Behappy Crafts (suzhou)Co.,Ltd , https://www.jshaoyue.com
Used for processing flat surfaces on horizontal milling machines. Cutter teeth are distributed on the circumference of the milling cutter, and are divided into straight teeth and spiral teeth according to tooth shape. According to the number of teeth and coarse teeth and two kinds of fine teeth. The helical tooth rough tooth milling cutter has fewer teeth, high tooth strength and large chip space, which is suitable for rough machining. Fine-tooth milling cutters are suitable for finishing.
2. face milling cutter
Also known as disc milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, also have coarse teeth and fine teeth. The structure has three kinds: integral type, insert type and transferable type.
3. End milling cutter
Used for processing grooves and step surface, knife teeth in the circumference and end face, can not work along the axial feed. When the end mill has end teeth through the center, axial feed can be provided.
4. Three-side edge milling cutter
Used for processing all kinds of grooves and steps, its two sides and circumference are provided with cutter teeth.
5. Angle milling cutter
For milling grooves at a certain Angle, there are two kinds of single Angle and double Angle milling cutters.
6.Saw Blade milling cutter
Used for machining deep grooves and cutting off workpieces, there are more cutter teeth on the circumference. In order to reduce the friction during milling, there are 15 '~1° auxiliary Angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail slot milling cutters, T - shaped slot milling cutters and various forms of milling cutters.