Doors and windows are a must-have building material product in our home decoration. Although many home decoration doors are installed by a dedicated master, we still need to understand the installation steps. What is the installation method of the door ? What? Next we will take a look at the decoration of the door installation method . Renovation door installation method, step 1 , paved the blanket, the tools used are placed on the blanket and then the product package is opened, and the products are placed on the mat. Check for damage and missing parts. Start the installation after everything is ready. Fitting the door installation method, step 2, determine the width of the adjusting frame according to the actual door hole depth (only the side without the slot can be sawed), and use the self-tapping screws to combine the two fixed frames with the upper fixed frame. Then combine the two side adjustment frames with the top adjustment frame. Insert the adjustment frame into the fixing frame groove (put a little white latex in the groove), and then use the straight nail to fix the two frames from the opposite surface. Fitting the door installation method, step 3 , putting the assembled door cover into the corresponding door hole, and then inserting the position of the door trim panel and the wall joint with the wooden wedge, and fixing the wooden wedge and the door panel with a small nail. . After fixing, use the line hammer and horizontal ruler to correct the horizontal and vertical degree of the door sleeve to the corresponding size of the door sleeve and the door leaf. After the door sleeve and the door hole are filled with wooden wedges, the door sleeve and the wooden board in the door hole are fixed with corrugated nails. If the gap is found to be too large, the styrofoam is used for filling. Renovation door installation method, step 4 , when installing door line to insert the right amount of white glue in the door slot, need to pay attention to the installation of door line should first install the two sides of the edge line, and then install the upper line. If it is installed, the rakes and grooves are tightened too tightly. Remember not to stubborn, especially the upper line. Regarding the door installation method for renovation , I will introduce it to you. I hope to help you, and more information on the decoration is on this site. Please stay tuned. Doors and Windows Doors and Windows Installation Door Installation Exit Sign,Exit Light,Exit Signage,Exit Sign With Lights NINGBO JIMING ELECTRIC APPLIANCE CO., LTD. , https://www.jimingemergencylight.com
