Sometimes, in order to expand the use of space, or to pursue a good decorative effect, the decoration company will open the balcony to the interior. But there is a part under the wall and window between the room and the balcony that cannot be moved. In the building, this low wall is called “weight wall” and plays the role of supporting the balcony. If this wall is dismantled, it will seriously affect the safety of the balcony and even cause the collapse of the balcony. Therefore, you can remove the door-window between the balcony and balcony of the house during the renovation, but the “weight wall” must not move.

1, quality determines everything

Whatever you do with a balcony, the quality of the balcony's packaging will determine everything. If you compare the aluminum windows on the balcony with the equivalent doors and windows on the walls, it is clear that the former requires much higher quality than the latter. Because the balcony is volleyed on three sides, the wind is blown on several sides, and its force is much larger than ordinary windows. In addition, many balconies were designed without regard to the future packaging of the balcony. At the top of the balcony and the guardrail, there was no place where the window could be set aside. Therefore, accidents can be easily caused by poor installation. If the balcony is not sealed well, it will leak in the cold winter, so that the indoor temperature will decrease; if it touches the windy weather, it will get a lot of dust into the room; the most troubling is that every time it rains, the seal is not strict The sash also leaks, wetting the things on the balcony. Therefore, the quality of the balcony packaging project is of utmost importance and will depend on your future use.

  

2, decoration balcony attention insulation

Decoration balcony should pay attention to insulation, Nanchang residential balcony, basically do not consider its insulation in the building, this is because there is a balcony inside the balcony doors and windows can play a role in thermal insulation. However, many residents who have remodeled their balconies have now dismantled the windows and doors by taking into account the influence of the balcony doors and windows on the entire room. Take a good measure of the insulation of the balcony. You can consider using polystyrene board as the insulation layer below the balcony window, or consider using rock wool as the insulation layer below the balcony window, and use a material with good thermal insulation to form the insulation layer of the balcony wall surface to cut off the indoor and outdoor cold. Hot air exchange.

  

3, balcony decoration attention use

Now every household has a balcony, basically a household and a balcony, so the ordinary residential design will have a primary and secondary balcony, when the balcony decoration, we must first understand the primary and secondary points of the balcony, in accordance with the needs of life clear balcony use. In general, the balcony adjacent to the living room and master bedroom is the main balcony. The function can be mainly leisure and fitness. It can be installed as a gym, tea room, etc. The wall and floor decoration materials should also be consistent with the living room; the second balcony is generally associated with the kitchen or The rooms outside the living room and master bedroom are adjacent to each other and are mainly storage, clothes, or study rooms. The decoration can be simpler.

  

Editor's summary: Although the balcony is not large, it can add a lot to home life if it can be used well. When the balcony is renovated, it must be considered for good use, and ensure the quality of the balcony decoration. Do not leave any security risks.

Balcony Decoration Decoration Notice Balcony Window Interior Decoration Decoration Design Residence Aluminum Alloy Decoration Partition Cut off door

Acid Etched Glass

Frosted Glass , also acid etched glass, maintains its look and finish over time, creating a translucent satin appearance which obscures view while maintaining a high level of light transmittance. Acid Etched glass can generally be tempered, laminated, drilled, cut, notched, polished, and beveled in a similar fashion to regular float glass.


Frosted glass can be processed into tempered frosted glass, frosted Laminated Glass, design frosted Tempered Glass, fully covered frosted tempered glass, frosted Insulated Glass, clear tempered frosted glass, ultra clear frosted tempered glass, color tinted tempered frosted glass and so on, all make to order.


Frosted glass, acid etched glass, acid etched glass is that unlike sandblasted glass it is low-maintenance and less likely to leave fingerprint marks. It widely be used for shower room, doors, partitions, fence, building walls, windows and so on. Some photos for reference:

Frosted GlassFrosted Shower Glass 1Glass Office PartitionsTranslucent Glass


Acid Etched Glass,Acid Etched Glass Panels,Acid Frosted Glass,Acid Etched Tempered Glass

Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com

Posted on