Water level sensor, alose called hydrostatic pressure level sensors, submersible level sensors, which are submersible level sensors used for measuring the level of liquids (including corrosive liquids) in deep tanks or water in reservoirs. It provide accuracy and reliability across a wide range of applications. Based on the principle that the measured liquid static pressure is proportional to the height of the liquid, the advanced isolation type diffusion silicon sensor or ceramic capacitive Pressure Sensor is used to convert the static pressure into electrical signals, and then through temperature compensation and linear correction, into standard electrical signals (generally 4-20mA/1-5VDC). water tank level sensor, pressure level sensor, submersible level sensor, hydrostatic level sensor, water Level Transmitter Xi'an Gavin Electronic Technology Co., Ltd , https://www.cngamicos.com
Silent diesel generators are power plants, mainly through the use of compressed air to ignite and ignite diesel fuel. They then convert heat energy into kinetic energy. It can be seen that the internal structure is very complicated. If the diesel generator is difficult to start, it will affect the normal operation of the entire unit. The reasons for the difficulty in starting diesel engines are as follows:
1. There is no oil in the fuel tank or the fuel tank switch is not open;
2, fuel pipeline or filter plug;
3, air exists in the fuel system;
4, the fuel pump does not supply oil or oil time is not correct;
5, fuel injectors do not spray or poor atomization;
6, the temperature is too low diesel engine is too cold to operate normally;
7, cylinder compression pressure is insufficient;
8, the starter does not rotate or rotation powerless;