Solid wood furniture, with its luxury and grace, has become the highlight of the finishing touch in the home space, and more loved the family to regard it as a collection of art. How to maintain solid wood furniture? Dust removal Always remove dust, because dust rubs the surface of solid wood furniture every day. It is best to use a clean soft cotton cloth, such as an old white T-shirt or baby cotton. Remember not to wipe your furniture with a sponge or tableware. When dusting, use cotton cloth that has been wrung out after wetting, because wet cotton cloth can reduce friction and avoid scratching furniture. It also helps to reduce the adsorption of dust by static electricity, which is good for removing dust from furniture surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth. clean In order to remove traces from the airborne contaminants, fumes during cooking, smudges during handling, and residues from glazing, we recommend the use of special furniture cleaners. This solvent can also help remove excess wax. Waxing Regular waxing, every 3 months, a layer of wax on the furniture. Before using the glazing wax in the furniture, check if the surface of the lacquer is intact. For newer solid wood furniture, first wipe the surface with a fine cotton cloth. For stains that have been left for too long or difficult to remove, use a cotton cloth with a small amount of gasoline or alcohol. Then use a small piece of cotton cloth to spread the amount of glazing wax over a large area, and then use a larger piece of dry cloth to wipe the wax evenly in a circular block. Before waxing, use a milder non-alkaline soapy water. The old wax is wiped off, and the waxing is not too dense, otherwise it will block the pores of the wood. Excessive waxing can also damage the appearance of the coating. American solid wood furniture is simple, natural and dignified, but it may be deformed or cracked due to changes in wood moisture content, so it is especially necessary to take care, especially in this hot summer. For example, the sun can not be directly exposed for a long time, not too cold or hot, too dry and humid environment is not suitable for solid wood furniture. If the temperature and humidity change is too large due to frequent switching of the air conditioner, even the qualified solid wood furniture products sometimes undergo deformation and cracking. Daily care Avoid letting the sun shine on the surface of the furniture for a long time, or it is easy to make the internal moisture of the wood unbalanced and cause cracks; in the dry environment in autumn and winter, artificial humidification measures should be used regularly to supplement the excessive loss of water, such as using soft Wipe the furniture after wet cloth; keep good humidity, ideal humidity is about 40%, if you use cold air for a long time, you can put water on the side. The temperature difference should not be too large, avoiding the air conditioner opening and closing, causing the temperature to change drastically; overheated items should be avoided directly on the furniture surface, which will damage the protective paint and wax on the furniture surface.
Hand Applied Wrapping Machine
The Hand Applied wrapping machine is a lightweight, low profile pipe wrapping machine that provides a simple way to apply tape coatings on pipelines. It can be used on any pipe 4" or larger and can accommodate tape with a core diameter of 1 1/2 or 3 inches. It can easily be used for either spiral or cigarette wrapping and is designed with separate tension adjustments for tape and release line take-up. This machine should be ordered by the width of the tape and not the diameter of the pipe.
Details:
· Hand Applied Wrapping Machine
· Applies tape coatings on pipelines
· Separate tension adjustments for tape and release line take-up
· Will accommodate tape with 1-1/2" or 3" core diameters
· Ideal for both spiral and cigarette wrapping
· It can be used on any pipe 4" and Larger
· Very low profile, requires less clearance
· Lightweight construction
· Easy to operate
· Order these machines by the width of your tape roll – NOT the diameter of the pipe:
· 2"-6" tape roll width
· 6"-12" tape roll width
· 12"-18" tape roll width
Weight: 10 kg per pcs
Operation: at least 2 people
Anti-corrosion Tape Wrapping Machine Wrapping Machines, Hand Applied Wrapp Machine, Anti-corrosion Tape Wrapping Machine Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })