Concealed Tan Glossy and Colorful Bathroom Ceramic Wall Hung Toilet With UF Seat Cover, Hinge set, Insert hinges into the WC pan, Tighten the screws of the hinges, Do not over tighten, Insert the seat cover onto the WC pan, Align the Toilet seat and cover with WC pan, Take off the seat cover, Tighten the screws, Cover the stainless steel cap on hinges, Insert the seat cover onto the WC pan, Easily lift by one push button.
Uf Toilet Seat Cover,Uf Soft Close Seat Cover,Uf Toilet Seat,Seat Cover Chaozhou Selora Ceramics Co.,Ltd. , https://www.chaozhoutoilet.com
Product Description
For extension rod, there are two shapes, one is round type, another one is hexagonal type. All extension rod are threaded and made by hollow drill steels.
This hollow hole are usually named flushing hole, used for transmitting water or air during drilling. Two ends threads can be used for connecting couplings, shanks, couplings or bits. Typically two ends of extension rods are male, while sometime one end is male and another one is female, then we call it M/F rod. We need couplings to connect extension rods, while for M/F rods, because one end is female, so couplings are not necessary.
Specifications:
roduct NameSize
Specification
Length
R25 Rod
Hex25
R25-Hex25-R25
610mm, 915mm, 1220mm, 1525mm,1830mm,2435mm, 3050mm, 3660mm
R32-Hex25-R25
1830mm,2130mm,2475mm,2795mm,3090mm,3700mm
Hex28
R32-Hex28-R25
3090mm, 3700mm
R38-Hex28-R25
R28 Rod
Hex28
R32-Hex28-R28
2475mm,2590mm,3090mm,3700mm,4005mm,4305mm
R38-Hex28-R28
3090mm, 3700mm,4305mm
R32 Rod
Hex32
R32-Hex32-R32
2475mm,3090mm,3700mm,4305mm
R38-Hex32-R32
2475mm, 3090mm,3700mm, 4005mm,4305mm, 4610mm,4915mm
T38-Hex32-R32
4305mm
Hex35
R38-Hex35-R32
3090mm,3700mm,4305mm,4915mm,5525mm
T38-Hex35-R32
3090mm,3700mm,4305mm,4915mm,5525mm,6135mm
T38-Hex35-R32 MF-rod
3090mm,3700mm,4305mm,4915mm,5525mm,6140mm
RD39
R38-RD39-R32
4305mm
T38-RD39-R32
4305mm,4915mm,5525mm,6135mm
Male/Female (M/F) rod, speed rod
M/F drill steel is an alternative to couplings sleeves to include the female part of the threaded connection as an integral part of the drill steel. M/F drill steel provides more rigid connections and is easier to uncouple and handle. The service life also tends to be better than with separate couplings. The advantages of drilling with M/F steel include: Easy handling, quicker uncoupling, tighter connections, the potential to drill straighter holes, and longer service life.
For Extension Rod and M/F steel process, the below two different types of heat treatment are used to strengthen high speed and powerful percussive drill string components to maximize their performance and reliability. Longer steel larger in diameter, conventional extension steel, Hexagonal and round cross sections are available.
- Carburization is a process used to harden the entire rod surface both internally and externally to strengthen and extend the life of the rod.
- High Frequency Induction is a process where only the thread ends of the rod are hardened to lengthen thread life.
Product Description
For extension rod, there are two shapes, one is round type, another one is hexagonal type. All extension rod are threaded and made by hollow drill steels.
This hollow hole are usually named flushing hole, used for transmitting water or air during drilling. Two ends threads can be used for connecting couplings, shanks, couplings or bits. Typically two ends of extension rods are male, while sometime one end is male and another one is female, then we call it M/F rod. We need couplings to connect extension rods, while for M/F rods, because one end is female, so couplings are not necessary.
Specifications:
roduct NameSize
Specification
Length
R25 Rod
Hex25
R25-Hex25-R25
610mm, 915mm, 1220mm, 1525mm,1830mm,2435mm, 3050mm, 3660mm
R32-Hex25-R25
1830mm,2130mm,2475mm,2795mm,3090mm,3700mm
Hex28
R32-Hex28-R25
3090mm, 3700mm
R38-Hex28-R25
R28 Rod
Hex28
R32-Hex28-R28
2475mm,2590mm,3090mm,3700mm,4005mm,4305mm
R38-Hex28-R28
3090mm, 3700mm,4305mm
R32 Rod
Hex32
R32-Hex32-R32
2475mm,3090mm,3700mm,4305mm
R38-Hex32-R32
2475mm, 3090mm,3700mm, 4005mm,4305mm, 4610mm,4915mm
T38-Hex32-R32
4305mm
Hex35
R38-Hex35-R32
3090mm,3700mm,4305mm,4915mm,5525mm
T38-Hex35-R32
3090mm,3700mm,4305mm,4915mm,5525mm,6135mm
T38-Hex35-R32 MF-rod
3090mm,3700mm,4305mm,4915mm,5525mm,6140mm
RD39
R38-RD39-R32
4305mm
T38-RD39-R32
4305mm,4915mm,5525mm,6135mm
Male/Female (M/F) rod, speed rod
M/F drill steel is an alternative to couplings sleeves to include the female part of the threaded connection as an integral part of the drill steel. M/F drill steel provides more rigid connections and is easier to uncouple and handle. The service life also tends to be better than with separate couplings. The advantages of drilling with M/F steel include: Easy handling, quicker uncoupling, tighter connections, the potential to drill straighter holes, and longer service life.
For Extension Rod and M/F steel process, the below two different types of heat treatment are used to strengthen high speed and powerful percussive drill string components to maximize their performance and reliability. Longer steel larger in diameter, conventional extension steel, Hexagonal and round cross sections are available.
- Carburization is a process used to harden the entire rod surface both internally and externally to strengthen and extend the life of the rod.
- High Frequency Induction is a process where only the thread ends of the rod are hardened to lengthen thread life.
Model NO.: T38
Weight: 15-50kg
MOQ: 10PCS
Trademark: R32, T38, T45, T51
Specification: SGS, CE
Origin: Fujian, China
HS Code: 82071990
Model NO.: T38
Weight: 15-50kg
MOQ: 10PCS
Trademark: R32, T38, T45, T51
Specification: SGS, CE
Origin: Fujian, China
HS Code: 82071990