Finish: Chrome
Trademark: Fyeer
Specification: 10pcs/ctn
Origin: Zhejiang, China
HS Code: 84818090

Material
Brass main body 
Material Analysis Cu>=59%
Work Pressure 0.05Mpa-1Mpa
Ideal Pressure 0.1Mpa-0.5Mpa.Installation pressure release valve when exceed idea  pressure
Standard Pressure Dynamic pressure 0.3±0.02Mpa
Water Pressure Testing 1.6MPA
Air Pressure Testing  0.6MPA
Cold Water Supply Temperature 4-29°C
Hot Water Supply Temperature   55-85°C
Proposed Water Supply Temperature   55-70°C
Out Water Temperature Range    20-55°C
The Safety Temperature    38°C
Safety Characteristic   If cold water supply fails, flow rate will be reduced to virtually shut off which avoid the risk of scalding  
Temperature Accuracy   Kept constant±2°C for the setting
The Thickness of Chrome Plating    Nicket>8um Chrome>0.2um
Quality Guaratee  5 Years Quality Guarantee

·Technical Parameter
1. Operating pressure: 0.05 - 1.0 Mpa
2. Theoretic pressure: 0.1 - 0.5 Mpa If the pressures over 0.5 Mpa, please installation a relief pipe. 
3. Cold water supply: 5 - 29 ºC
4. Hot water supply: 50 - 80 ºC
5. Adjustable temperature range: 20 - 50 ºC
6. The most comfortable temperature: 38 ºC 
Under 0.3Mpa, cold water temperature within 18--23ºC; hot water temperature within 60--80ºC.
7. Safety test: If interrupted cold water supply within 5 seconds, the outflows reducing to 1.9L/Min automatically, the outflows less than or equal to150ml, the outflows temperature: less than or equal to 49 ºC.
8. Life test: Testing under EN817, GB/T18145-2000 (over 70.000 cycles), Testing under CSA B125-98 ASSE 1016 (over 10.000 cycles).
9. Sensitivity test: If inlet water temperature is constant, and the pressure in changeable about 20%, the outflows temperature changes less than or equal to 2ºC; If inlet water pressure is constant and hot water temperature changes in 50-80ºC, cold water changes in 5-29ºC then the outflows temperature changes less than or equal to 2ºC.
10. Applicable Standards:CSA B125-98 ASSE 1016 EN1111 AS-4032.1
11. The water supply pressure impacts on outflows temperature: Please read the following chart (Fig.1).

· THERMOSTATIC BATH & SHOWER MIXER TAP SET 
· DECK MOUNTED 
· CERAMIC CARTRIDGE FOR SMOOTH OPERATION 
· FULL AERATOR FOR SOFT WATER FLOW 
· FULL BRASS CAST BODY WITH HIGHLY POLISHED CHROME PLATE THERMOSTATIC BATH TAP 
· 5 FUNCTIONS SHOWER HEAD 
· RAIN 
· MIST 
· MASSAGE 
· RAIN & MASSAGE 
· RAIN & MIST 
· SUITABLE FOR MOST WATER SYSTEMS 
· OPERATING PRESSURE IS 0.5 BAR OR MORE 
· FOR MEASUREMENTS VIEW IMAGES 

Common rebar splicing machine, which is different Special Rebar Cutting Machine. They're different from the machine structure, cutting range and so on.

Common Rebar Cutting Machine also can be used to cut normal carbon steel rod, hot rod steel, deformed steel, flat steel, square steel, and angle steel in machine processing and construction projects.

The cutting head is not round, and with angle. It should be cut by abrasive-disk cutter.

Rebar cutting machine1Common Rebar Cutting Machine

Common Rebar Cutting Machine

Common Rebar Cutting Machine,High Precision Rebar Cutting Machine,Rebar Steel Rob Cutting Machine,High Efficiency Rebar Cutting Machine

BAODING JINDI MACHINERY CO., LTD , http://www.rebarconnector.com

Posted on