Did Mom and Dad consider the following pitfalls that may pose a threat to your baby's safety when choosing a crib for a newborn baby? Do you know that not all of the cribs on the market are produced for safety reasons? How can I pick the best crib for my baby's growth? The following will explain it in detail.
Trap one: fence
Safety hazard: The baby's head bones are relatively soft. If the fence is too wide, it may happen that the baby's head is drilled in and trapped between the two fences.
Defensive preparation: When purchasing a crib, you can carry a ruler with you and measure the spacing of the guardrails of the crib to ensure that the interval between them is 4.5 cm - 6.5 cm.
TIPS: You can bring a Coke can to test when you buy, and the Coke cans should not pass through the railing.
Did Mom and Dad consider the following pitfalls that may pose a threat to your baby's safety when choosing a crib for a newborn baby? Do you know that not all of the cribs on the market are produced for safety reasons? How can I pick the best crib for my baby's growth? The following will explain it in detail.
Trap one: fence
Safety hazard: The baby's head bones are relatively soft. If the fence is too wide, it may happen that the baby's head is drilled in and trapped between the two fences.
Defensive preparation: When purchasing a crib, you can carry a ruler with you and measure the spacing of the guardrails of the crib to ensure that the interval between them is 4.5 cm - 6.5 cm.
TIPS: You can bring a Coke can to test when you buy, and the Coke cans should not pass through the railing.
Trap 2: Mattress
Safety hazard: The mattress of the suffocating, trapped crib is absolutely suitable for the size of the crib. A mattress that is too small is easy to move and may cause a gap in the bed. Excessive gaps can cause your baby's arms or legs to get inside. The baby's arms, legs and face are buried in a soft mat, which may cause trapped or even suffocation.
Defense preparation
1. Push the mattress to one end of the bed and check that the remaining gap is more than 4 cm. If you can still place two fingers between the mattress and the edge of the bed, this means the mattress is too small.
2. Regularly check the support system of the baby mattress. Any hooks that are not in the proper position must be repaired or replaced.
The hooks and bed plates supporting the mattress should be securely embedded in the grooves by the safety clips.
Note: The baby should not be placed on any soft surface. The water bed, the cloth bag containing the beans, the wrinkles and gaps of the soft and loose surface will keep the air around the baby's face and prevent the baby from breathing.
Trap three: rope
Safety hazards: straps that are tied and suffocated may entangle the baby's body. If you accidentally tie your neck, there is a danger of suffocation.
Defense preparation
1. If the baby's bed is bundled with a bumper, be careful that the straps that are bundled beyond the bumper should be cut short and cut to prevent the baby from chewing or being entangled.
2, toys, pneumatic accessories, pacifiers and bedding should also be checked to ensure that there is no longer than 18 cm long, the rope may suffocate the baby.
Note: Baby who can sit up, do not install bumpers on the bed.
Trap 4: pillows, blankets, bedding, etc.
Safety hazard: Although the soft bedding that hinders breathing and suffocation looks very comfortable, once the baby is hugged, it may block the head and affect breathing.
Watch out for the seven traps of the crib
Defense preparation
1. Take the quilt, the pacifier and the big, soft pillow.
2, lay the sheets and flatten as much as possible, and put the sheets tightly on the mattress to avoid wrinkles and hinder the baby's breathing.
3, do not use the active plastic mattress cover or waterproof sheets, so as not to entangle the baby's head and cause the baby to suffocate.
4, sheets and blankets should be large enough to be stuffed into the mattress, but the bedding is not too tight, otherwise it will limit the baby's freedom of movement.
Trap Five: Hanging Toys
Safety hazards: entanglement, suspension usually babies can crawl in 4-5 months, when the baby crawls, it is easy to be entangled by the hanging rope and dangerous.
Defense preparation
1. When unattended, do not tie the toy between the railings or hang it above the bed.
2. Keep the toy in a place that the baby can't catch.
3. Once the baby is able to sit up, be sure to remove all hanging toys.
|
Product name
|
HDPE geomembrane fish farm shrimp pond dam landfill mine tailing liner
|
|
Usage
|
Waterproof and seepage control project
|
|
Color
|
Black/white/blue/double color
|
|
Material
|
HDPE/LDPE/LLDPE/EVA
|
|
Thickness
|
0.1mm-3.0m 1m-8m in roll width, the length as client's request
|
|
Service valid term
|
More than 10 years!
|
|
Payment term
|
L/C D/A D/P T/T Western Union Money Gram
|
|
Packing detail
|
Packing in woven bags. Keep it away from fire.
|
|
Property
|
Good flexible ,UV treated,Excellent environmental stress cracking resistance property,Low temperature resistance, corrosion resistance, aging resistance.
|
|
Specific Use
|
Municioal environmental project, water conservancy projects,Landfill cap, mining heap leach pads, pond liner, canal linings, tank, linings, raw water treatment reservoirs, retention ponds,Waste water treatment lagoon, secondary containment.
|
Product Features
1. Good physical and mechanic performance.
2. High tearing resistance, strong deformation adptability.
3. Corrosion resistance, aging resistance.
4. Good adaptability to high and low temperature, non-toxicity, long service life.
5. Good waterproof, drainage, anti-seepage and damp proof effects.
6. Complete width and thickness specifications, low cost and easy installation.
Product Application
|
Aquaculture Industry
For example, industrialized aquaculture ponds, fish ponds, shrimp pons lining, sea cucumber circle protection, etc.
|
|
Environmental Protection
|
 |
 |
Water Conservancy
|
|
Municipal Engineering
For example, tunnel, subway, underground works of buildings and roof cisterns, impervious roof garden, lining of sewage pipes, etc.
|
 |
2. Tow adjacent longitudinal joints should not be in a horizontal line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or clay levelingbase, and then laid the geomembrane. The geomembrane should not be stretched too tight, and the part of the soil bured at both ends is corrugated. A transitional layer of about 10cm is laid on the geomembrane with sand or clay.
Why Choose Us?
Company Information
Customer Feedback
Packaging & Shipping
FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001 certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Geotextile Fabric,Hdpe Geomembranes,Pp Pet Geotextile,Geosynthetic Clay Liner
Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com