The program maintenance is in accordance with the effective maintenance procedures. In the second phase of a nuclear power project, the radiation instrument includes two types: the plant radiation monitoring system (KRT system) and the entrance and exit control system (KZC system). The KRT system and the KZC system consist of fixed instrument portable instruments. The following is an analysis of the maintenance of the instrument program. The fixed instruments in the KZC system mainly include personal dose management system, systemic pollution monitor, vehicle and personnel monitoring system. Each set of instruments is mainly composed of detectors, measuring components and processing display units. Portable instruments in KRT system and KZC system include C dose monitor, A, B surface pollution monitor, etc. Each instrument consists of detector, measuring circuit, processing display plug-in and so on. Basic requirements for instrument troubleshooting: In order to maximize the operational efficiency of the radiation monitoring system, ensure that the system instrument has normal monitoring functions, protect the radiation safety of workers and the operational safety of the power plant, the basic requirements for instrument troubleshooting of the radiation monitoring system are Fast, timely, effective and reasonable. Programmatic overhaul is to carry out programmatic overhaul of the faults of each unit of the radiation monitoring system in accordance with the effective maintenance procedures. The fault type of the instrument is repaired according to the corresponding repair procedure, which minimizes the inspection time and improves the maintenance efficiency. At the same time, it is convenient for scientific management of maintenance work. The radiation instrument with bus structure and modular design lays the hardware foundation for the program maintenance and repair of the instrument fault. This design allows us to quickly determine the faulty component and perform timely as long as it operates according to reasonable maintenance procedures. Overhaul. Concerned about surprises Label: Analyze the maintenance of the instrument program Previous: Maintenance skills during multi-axis drilling machine running-in period Next: Different types of drilling machines are used differently Here are all BLACK & DECKER power tools and the designated carbon brushes,motor brushes, electric brushes, motor brushes, electric motor brushes or simply brushes. Black & Decker Carbon Brush Assembly,Black & Decker Carbon Brush,Special Black & Decker Carbon Brush,Power Tool Carbon Brush Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com
For each power tool, there are usually two carbon brushes to choose from: With automatic stop and without automatic stop. Carbon brushes with automatic stop have a spring through the length of the carbon brush. When the carbon brush wears out, the spring gets released, the current to the carbon brush gets interrupted and your power tools switches off at once. The advantage: No additional wear and tear to your power tool. Carbon brushes without automatic stop do not stop functioning at once, but performance of your power tool will detoriate rapidly. Although handy as a warning sign, this usually isn't very beneficial to your power tool.