Note: Double-click the Roughing icon in the browser to pop up the parameter setting dialog box. Change the parameter setting to view the change of the tool path to better understand the meaning of these parameters (you can see the tool path more clearly through the solid simulation). Variety). In the parameter setting page, you need to pay attention to the setting of the following parameters. 1. The meaning of several key control planes on the depth tab page Level: The reference plane. The absolute value of Z in the current coordinate system. Clearance: Close to the plane. The absolute value of Z in the current coordinate system. Depth: The amount of back-to-back knives, relative to the relative value of "Level", is positive above "Level", and vice versa. Retract: Retracting the plane. The relative value based on the "Level" face, which by default is "Clearance". Intermediate Slices sub-level cutting. Sub-level cutting is used to reduce the height of the remaining steps after roughing. The resulting tool path is similar to roughing, but only the stepped portion is machined. Sub-level cutting allows cutting from bottom to top, see Figure 7. %Stepover - the step size of the sub-level cutting. Cut Increment - The cutting increment of a sub-level cut. Percentage Feed - The feed rate for sub-level cutting is the percentage of normal feed. 2. Several key parameters in the General tab The content of Rest Rough's processing is the processing of the residual material in the rough processing. The premise of this option is that there must be a roughing step before this. The system calculates and generates the tool path based on the residual material remaining in the previous roughing process. Previous Next Sewing Measuring Tape,Tailor Measuring Tape,Custom Logo Tape Measure,Tailor Measuring Soft Tape Measure Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.henglimtools.com
The resulting tool path is as follows, see Figure 6. 
