1. The seams of gap wood sealing line, corner line, and waistline veneer are not more than 0.2mm, the angle between the line and the line mouth is not more than 0.3mm, and the interface between the veneer and the plate is not more than 0.2mm, the sliding surface error is not Beyond 0.3mm.

2, structural inspection structure is straight. Whether horizontal or vertical, the correct carpentry practices should be straight.

3, the corner to see if the corner is accurate. The normal corners are all 90 degrees, except for special design factors.

4, the parquet to see if the spell is tight and accurate. The correct wooden pattern is to be seamless or to maintain a uniform distance.

5, shape inspection arc and roundness is smooth and sleek. In addition to a single, a number of the same shape to ensure consistency in the shape. It should ensure that the surface of the woodworking project is flat and there is no drum or breakage. Symmetrical carpentry projects should be symmetrical.

6, the cabinet door cabinet door switch is normal. When the door is open, it should be light and no noise.

7. The nails used for the eye nail ceiling structure need to be painted with rust paint on the nail eye.

Aisle Ceiling Three Trees Paint Switch Lacquer Door

Tile Insert Floor Drain

Tile Insert Floor Drain,Tile Insert Floor Drain Cover,Tile Insert Stainless Steel Floor Drain,Black Linear Tile Insert Floor Drain

Kaiping City Jinqiang Hardware Products Co.,Ltd , https://www.kimpowerdrain.com

Posted on