Maintenance precautions: When I visited the users of PVC flooring, I found that many customers use PVC flooring as marble and ceramic tiles. They do not know the knowledge of floor maintenance during maintenance, thus causing problems such as damage and pollution of PVC flooring. What should we pay attention to when using PVC flooring? 1. Sand and gravel protection: A sandstone protective mat should be placed at the door of the room where the PVC floor is used and the door of the hall to prevent the shoes from bringing sand and gravel into the room to scratch the floor surface; 2, item handling protection: When carrying items, especially when there are metal sharp objects at the bottom, do not drag on the floor to prevent floor injuries; 3. Pyrotechnic protection: Although the PVC floor is a floor with a fire rating of flame retardant (B1), it does not mean that the floor will not be burned by fireworks. Therefore, when using PVC flooring, do not burn the cigarette butts, mosquito coils, and electricity. Irons and high-temperature metal objects are placed directly on the floor to prevent floor damage; 4, regular floor maintenance: PVC floor cleaning using neutral detergent cleaning, can not use strong acid or alkali cleaner to clean the ground, do regular cleaning and maintenance work; a, daily maintenance: use a clean 90% dry mop to clean the ground, to be partially cleaned for serious pollution; b. Monthly maintenance: the floor is clean, and the local foundation is damaged by ground waxing. Especially the homogenous PVC floor is generally waxed once a month for curing; 5, pollution treatment: PVC floor stained ink, food, greasy, etc. should be wiped off the dirt, and then wipe the traces with a diluted detergent, the residual black leather shoe print is difficult to remove when you can use the veil loose perfume to scrub, not Pine perfume is poured on the floor to clean, after scrubbing to replenish wax; 6. Matters needing attention: the floor cleaning can not be cleaned with a cleaning ball or a knife. If the dirt cannot be cleaned by conventional methods, consult the relevant person, and do not use acetone, toluene, and other chemicals. 7. Chemical protection: avoid a large amount of water staying on the floor surface for a long time, especially the block floor, the homogenous floor, the water soaking the floor for a long time, may penetrate into the floor to make the floor glue dissolve and lose the adhesion, or it may The floor surface of the protective wax moisture layer causes floor pollution, and it is also possible that the sewage penetrates into the floor to cause discoloration of the floor (homogeneous floor); 8. Sun protection: avoid direct exposure of strong light, do a good job of ultraviolet radiation on the floor to prevent discoloration and fading of the floor. First, the purpose of cleaning and maintenance 1. Improve the appearance: timely remove the dirt generated in daily use, so that the elastic floor fully demonstrates its extraordinary appearance and natural gloss. 2. Protect the floor: protect the elastic floor from accidental chemicals, cigarette butts, shoe prints, oil and water, minimize the mechanical wear on the surface, and maximize the durability of the floor itself, thus extending the floor. The service life. 3. Convenient care: Due to the tight surface structure and special treatment of the elastic floor itself, pay attention to daily cleaning and maintenance, which can make the floor easier to care for and prolong the service life. Second, care considerations 1. All kinds of dirt on the ground should be removed in time. 2. It is absolutely forbidden to soak the floor in clear water. Although some floors use waterproof glue to cut off the water source (such as floor drains, water rooms, etc.), long time being soaked in water will seriously affect the service life of the floor. In the cleaning process, the sewage is drained by a water absorbing machine in time. 3. For places with more people and more wear, shorten the maintenance period and increase the number of waxing of high-strength wax. 4. Never use hard, rough cleaning tools (such as steel balls, scouring pads, etc.) to prevent sharp objects from colliding with the elastic floor. 5. It is strongly recommended to place a foot pad at the entrance of a public place with high traffic flow to prevent the stained floor material from being contaminated by dirt and sand. Third, the maintenance methods at different stages: (1) After the floor is laid and cleaned and used before use 1. Remove dust and debris from the floor surface. 2. Use a scrubber to add 3M red grinding disc or similar products to clean at low speed (diluted with strong universal cleaner 1:20 and added to the scrubber) to remove the protective wax, grease, dust and other dirt on the floor surface. Drain the sewage with a water suction machine. 3. Wash with water and blot dry. 4. 1-2 layers of high-strength surface wax as needed. Cleaner: strong universal cleaner high-strength wax Tools: grinding machine red grinding machine water suction machine wax drag water press (2) Daily cleaning and maintenance 1. Dust or vacuum cleaner to vacuum. (Drag the dust on the ground, dry it and push it.) 2. Wet drag. (Use a floor cleaning polish to dilute 1:20 with water and mop with a semi-wet mop.) If necessary, you can also use a scrubber with wash & shine for low speed cleaning. Cleaner: ground dragging agent floor cleaning polish Tool: dust push mop (3) Regular cleaning and maintenance 1. Dust or vacuum cleaner to vacuum. 2. The floor cleaning varnish is diluted 1:20 with water, and mopped or mixed with a high-speed polishing machine and a red lap. 3. Upper 1-2 layers of high-strength wax. 4. If necessary, it can be polished with a high-speed polishing machine and a white polishing pad. Cleaner: floor cleaning polish high strength wax Tools: dust pusher red, white grinding water suction machine wax drag water machine (4) Complete renovation 1. Dust or vacuum cleaner to vacuum. 2. Dilute with a strong de-waxed water 1:10 and spread evenly on the ground. Wait for 5-10 minutes. Use a scrubber and a red grinder to clean and dewax at low speed. Use a water suction machine to drain the sewage in time. 3. Wash with water and blot dry until no residual detergent is left on the floor. 4. 1-2 layers of high-strength surface wax as needed. Cleaner: floor cleaning polish high strength wax Tools: dust pusher red, white grinding water suction machine wax drag water machine (5) Treatment of special dirt 1. Oil stain: Partial oil stain, the water-based degreaser stock solution is directly poured on the towel to wipe; large area oil stain, the Wei Te water-based degreaser is diluted 1:10, and the grounding machine is added with a red grinding disc to clean at a low speed. 2. Black offset printing: use spray cleaning and maintenance wax with high-speed polishing machine plus white polishing pad polishing treatment. For long-term black offset printing, the strong black offset remover can be directly applied to the towel and wiped. 3. Glue or chewing gum: Use a professional strong degumming agent to pour it directly onto the towel and wipe it off. Detergent: water-based degreaser spray cleaning and maintenance wax strong black offset remover strong degumming agent. PVC sports floor maintenance method Sports flooring can be left black and dirty due to shoe prints, making the stadium a heavy and expensive maintenance cost. UV mesh surface treatment that has been added during the production process. This technology makes it easier to remove the shoe print when cleaning the floor, while also protecting the appearance of the sports floor and extending its life. We use special rubber and resin products to remove rubber shoe prints and other dirt. This chemical cleaning method can effectively remove dirt without causing damage to the floor itself. We can also use professional cleaning sprays in combination with ordinary detergents to clean the dirt. ◆ Reduce maintenance costs Due to the application of simple and fast cleaning characteristics, the maintenance of the sports floor can achieve significant savings in the following aspects: --save time --Save materials -- Labor saving Overall hygiene treatment In the face of higher safety requirements, the sports floor is also treated with antibacterial treatment. This treatment is applied to the material system of the entire floor, including the foamed material and the surface layer. This reduces the risk of infection in the event of any accidental injury. ◆Note Cleaning the floor must be completed 72 hours after the floor is laid. Do not use black rubber rollers or gaskets when laying. PVC or polyethylene rollers or gaskets should be used. Surface sports venue Installation instructions Mechanical cleaning, with self-cleaning cleaner or drum cleaner + red cleaning tray + neutral or non-alkaline detergent Protection Daily cleaning, dry sweep, wet sweep Regular cleaning (not less than 1 week) Mechanical cleaning, self-cleaning cleaner or drum cleaner + red cleaning tray + neutral or non-alkaline detergent Regular shoe print cleaning (not less than 1 month) After applying the shoe print remover to the dirty area for 5 minutes, use a self-cleaning cleaning machine for mechanical cleaning + red cleaning plate Installation method and maintenance Installation method and maintenance Grassroots requirements: The ground floor of the construction must be clean, durable, flat, no sand, no moisture, and no cracks. The concrete floor moisture content cannot exceed 2.5%. The moisture content of the gypsum floor shall not exceed 0.5%. Before the floor is laid. After the floor is dusted, PVC coils can be laid. If the original ground is uneven, it can also construct self-leveling of about 2mm. If it is non-absorbent ground such as mineral base, stone, ceramic tile, etc., it can be directly paved. Note: If it is a wet floor such as a basement, the floor must be waterproof to isolate the water vapor. Mobile installation 1. The floor and the floor are bonded together by the special connecting belts provided by the manufacturer. The floor and the floor surface are not bonded. The pvc plastic floor can be rolled up or removed at will, which is convenient and labor-saving. 2. Partial bonding: 20 cm of adhesive bonding on the ground with the edge of the floor as the reference. 3. Full rubber bonding: all the glue is glued on the ground to be laid. 1. The ground should be laid flat and clean. 2. Before the sports floor is laid, it must be laid out in advance to lay the ground for more than 24 hours, and the on-site temperature should not be lower than 15 °C. After the floor is restored, the ends should be kept 5cm more. Before pasting, roll the unfolded floor back about halfway, then scrape the glue – starting from the middle – the glue is applied with a toothed scraper. 3. Arrange in the order of the number of the floor, align and merge, pay attention to the alignment of the site line during the paving process. 4. Open the adjacent two pieces of floor along the joint, place the special connecting belt of the manufacturer on the lower side of the joint, brush the surface of the connecting belt, first stick one of the boards to the half of the connecting belt, then Stick the other half to the remaining connecting straps and tighten the gap. 5. It is recommended to use water-soluble glue that is harmless to the human body for construction. When the floor is pasted, use a cork block to squeeze the floor surface from the middle to the ends so that it is flat without leaving air bubbles, and the roller is completely rolled. Regular maintenance will keep the floor surface intact and extend the life of the floor. The period of maintenance depends on the natural conditions and the intensity of use. The floor must be cleaned with a mop every day or with a vacuum cleaner to remove dust from the surface. Small areas can be cleaned manually. Medium or above areas can be cleaned with a scrubber. Do not use cleaning equipment that will cause abrasion on the floor. Use a neutral detergent when cleaning. After washing, wash with water and dry or dry the floor to avoid sedimentation. Footprints and stains should be removed immediately with an appropriate cleaning method. Most sports floors have floor lines (painted on the surface or attached to the surface). When the floor is being serviced, it is necessary to strengthen the maintenance of the floor so that the site line will not be damaged and moved. A door mat should be placed at the entrance of a place with a large flow of people. 1. It is strictly forbidden to wear shoes, high heels or shoes with falling colors. 2. It is strictly forbidden to cut and squeeze, and the surface should not be rubbed against hard objects to avoid damage and damage. 3. It is strictly forbidden to use corrosive chemicals such as acid and alkali on the floor and keep away from fire and high temperature to avoid deformation of the floor. 53Cm Pvc Wallpaper,Modern Chinese Embossed Pattern Wallpaper,Daixin Chinese Style Wallpaper,Modern Striped Wallpaper,Geometric figure PVC wallpaper JIANGSU ARTSTYLE DECORATION MATERIALS CO..LTD , https://www.artstyledecor.com