Spraying pesticides for crops and adding water is the most common use of our farmers. But how can we better match the effects of pesticides?
What is the dose? That is, the amount of pesticide used in 1 mu or 1 hectare, also called usage. This amount can be a few grams of pure drug, or how many grams of powder, granules or how many milliliters of emulsifiable concentrate. In the instructions for use, the amount of the drug to be used is more suitable for the user to directly dispense the pharmaceutical solution, but pay attention to the content of the drug. The amount of use per mu is different. In some pesticide instruction manuals, the concentration of the spray solution (such as 1000 times solution) is also used to guide the use. This is usually specified as a constant, that is, 30 to 100 liters per acre. Only by ensuring the amount of this liquid can an effective dose be guaranteed.
The amount of each agent used has been obtained after many years of research and testing by experts. In addition to ensuring the effectiveness of the control object and the safety of the crop, economic factors are also considered. In other words, you can increase the dose, but the loss will not exceed the increased cost, it is not cost-effective. Moreover, increasing the dose may also cause phytotoxicity or increase environmental pollution, and even endanger the safety of agricultural products, the consequences may be very serious. Therefore, generally do not arbitrarily increase the amount of pesticides used. Of course, in areas where resistance is produced, it is necessary to increase the dose in order to ensure the control effect, but this cannot be said to be a common phenomenon.
There may be many reasons for the poor control effect, among which water is not willing to be one, and it is more common. The pesticide spray on water is essentially a place where the agent is evenly dispersed on the surface of the crop or where pests and diseases are concentrated. To be fully sprayed, the pests will not die by themselves. To achieve good dispersion, the amount of spray and the power of the sprayer, the working pressure, and the diameter of the sprayed droplets should match. Usually when using a backpack-type mister or a manual sprayer with a small-aperture spray, the droplets are small, and the spray volume per acre can be controlled within a low capacity range of 0.5 to 30 liters, often 5 to 10 liters. It can achieve good control effect. When using the Gongnong-16 type knapsack sprayer, due to the small pressure and large spray droplets, it is necessary to increase the spray pressure to increase the dispersion. Generally, it should reach 30-100 liters per mu. .

Pesticide price:
Biological pesticides:

Super Abrasives


Superabrasives come in the form of grinding wheels and are used when the material being processed is either too hard or too delicate for regular abrasives.

Industrial diamonds are one of the most common materials used to create the grinding material. Contrary to popular belief, diamonds are not as rare as marketing campaigns will tell you.

After diamonds,cubic boron nitride is the second more durable material for cutting. This is followed by polycrystalline.

The most obvious advantage is that these Grinding Wheels are extremely hard and durable. This allows them to give better performance and greater longevity over regular abrasives.

When your wheel lasts longer you will see reduced costs for fixtures and tooling. This opens up your budget up to investing in more machines.

You will notice that the wear and cuts on your materials will be even. Because the abrasiveness of the wheel is so strong, it doesn`t develop uneven worn away spots as quickly as regular abrasive wheels.

So the output from your production will be consistent. So your manufacturing efforts will produce reliable and consistent results.

It can be tough to justify the upfront increased costs of superabrasive wheels. But the durability and quality of their production output make them well worth it.

But you`ll quickly realize that your productivity has increased by using superabrasives. You will have more parts processed per wheel and fewer wheel changes.

Kemei produces both conventional grinding wheel and super abrasive grinding wheels, such as white aluminum grinding wheel, pink wheel ,green silicon wheel, diamond grinding wheel and CBN grinding wheels.

If you need any type of grinding wheel and any suggestion on grinding wheels, just contact us.


Super Abrasives,Grinding Wheel Stone,Grinding Wheel For Bench Grinder,Electroplated Cbn Cut Off Wheel

Henan Jinlun Superhard Material Co., Ltd , https://www.kmgrindingwheels.com

Posted on