The improvement of life, our requirements for the house is also getting higher and higher, when the purchase is the most important thing for us, Loft is the first choice for many young people, but everyone knows that after the purchase of the loft type, the decoration is ours. Most concerned about it. So what loft decorated model room needs to pay attention to it? Just like everyone today small to see with the view of loft decorated model room model room decoration skills and loft precautions it! Hope you can help your being renovated.


loft装修样板房


Loft decoration model room skills:


1. Operating area leisure area, away from the second floor

For the small-sized loft, the division of the layout is very important. If you can plan the location of each functional area in advance according to living habits and visual effects, avoid the open kitchen operation area and the most common sofa leisure that will need to walk around. The area is set under the second floor, so your loft will look a lot more comfortable. For example, for a model room with a height of only 4.89 meters, the height of the second floor is only about 2.3 meters, plus the lamps, it is lower, if you frequently walk or stay for a long time, depressed and uncomfortable The sense will be significantly enhanced.


2. Minimize physical walls

The appearance of the physical wall is a "block" word both functionally and visually. It is undoubtedly a taboo for loft decoration. Therefore, try to avoid adding a solid wall to the small loft, especially the wall of the second floor to the outside room. Otherwise, it is not transparent enough from the top to the bottom, and it is depressing from the bottom up. In addition, the solid wall will also bring inconvenience to the lighting and ventilation of the room, not only pull the energy-saving and environmentally friendly hind legs, but also increase the cost of living. Design suggestion: The wall of the second floor room can be replaced by glass or a moderately high degree of railing, while the heavy curtains are a great way to make up the privacy of the room.


3. The main body color of the room is no more than three

Don't think that the color matching in the room is only related to the aesthetics. In fact, the proper use of colors and colors can make the pocket loft look more spacious. Basically, all the hot-selling floor model rooms have a stretching and stretching effect in order to visually see the room. The second floor main and guest bedroom have selected the wallpaper with vertical stripes, but the backlit room has light stripes and a sunny room. Then used deep stripes. Therefore, in general, the area of ​​the loft room with a small area or a low floor height should not exceed three, and the color should not exceed five, otherwise there will be a counter effect.


loft装修样板房


Loft decoration model room notes:


1, LOFT's biggest bright spot is that there are two floors above and below, some of the LOFT design of the real estate, the second layer of construction does not use concrete, but only a layer of channel steel, and then add a layer of wood board. “From the point of view of load-bearing, there is no problem with the wood board, but the sound insulation effect of the concrete will be poor. The activities on the second floor will affect the people on the first floor. So when you clean up the floor, don’t forget to add it between the channel and the wood board. Soundproof strips."


2, the general LOFT depth is relatively long, how to do light and ventilation is a key issue. Some LOFTs will have a depth of 6 meters. There is only one window in the room, and some owners want to make a gap in the room, but they often pay attention to privacy. It is not good to illuminate and ventilate far from the window, so it is recommended. Before the renovation of the landlord, it is necessary to pay attention to the use of different layers to solve the functional partition problem.


3, ordinary LOFT, the area of ​​a wall is larger than the level of the wall, but the height of the floor is only about 2.5 meters, there will be a certain sense of oppression, so the wall should not be all pure white, there should be more colors. Ceiling is also a problem, many families like the ceiling above the living room is higher, the four sides are slightly lower, and then a circle of lights, so that the room is very high. The LOFT has a lower floor height, but there are ways to visually increase the wall height.


The loft style is mostly a small-sized high-rise house. This type of apartment is different from a normal apartment, so we need to understand what style is right for us when we decorate. The above is the small loft today introduced for everyone loft decoration model room skills and loft decoration model room considerations to end here, want to know more information, please continue to pay attention to the decoration home.


More related wonderful reading:

Loft decoration model room design skills, loft decoration model room points

What are the small loft decoration techniques? Small loft decoration considerations

What are the loft decoration techniques? What is the loft decoration precaution?

Loft decoration design style features loft decoration design considerations

Small apartment loft decoration method small apartment loft decoration precautions

HANMAC is specialized in Carbon Steel Weld Neck Flange, A 105 Weld Neck Flange, As a suppliers/factory, HANMAC wholesale high-quality products of wn flange, Class 150 Weld Neck Flange, SCH 40 Wn Flange . we have the perfect after-sales service and technical support. Look forward to your cooperation!

ANSI B16.5 150LBS Weld Neck carbon steel pipeflanges

Product Range:

1.Welding neck Flange    2.Slip on

3. Blind Flange                4.Long welding neck flange   

5.Lap joint flange           6.Socket welding

7. Threaded Flange          8.Flat flange

Size:

DN15-DN2000

Pressure:   

150#, 300#, 600#,900#,1500#, 2500#

PN6, PN10, PN16, PN25, PN40, PN64, PN100

PN6, PN10, PN16, PN25, PN40

1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K

Standard:   

ASME B16.5, ASME B16.47A, ASME B16.47B

BS4504

DIN2631, 2632,2633,2634,2635; DIN2573,2576,2502,2503, 2543,2545;DIN 2527;DIN2565,2566,2567, 2567

GOST12821-80;GOST12820-80

EN1092-1

JIS B2220

Material:  

ASTM A105.  CS/SA 105/SA105N; CS RST37.2, S235JR; Q235; CS CT20; CS SS400, SF440; S235JRG2,P245GH,P250GH, P280GHM 16MN, 20MN ,20#

Coating:  

Black, Yellow paint; rust-proof oil;  Antirust oil, Clear lacquer, Black lacquer, Yellow lacquer, Hot-dipped Galvanized, Electrical galvanized

Package:  

Ply-Wooden Case for small size

Pallet for big size

Certificate:

TUV,ISO9001:2008;PED97/23/EC,ISO14001:2004,

OHSAS18001:2007

The Third Part Inspection:

BV,SGS,LOIYD,TUV,and other party alloyed by clients

Heat Treatment:

Normalizing, Annealing, Quenching+Tempering

Technical:

forging

Brand

CHM

Min Order:

1PCS

Payment Terms:

T/T, 100% LC AT SIGHT,  100% LC 30 OR 60DAYS AFTER BL OF DATE,

Delivery Time:

7-30days according to acutal order.

Delivery Port:

TIANJIN, QINGDAO,SHANGHAI, NINGBO, SHENZHEN,

Delivery Ability:

500TONS/MONTH

Applicating:

Paper-marking, Oil and natural gas pipeline, Boiler and heat exchanger, Smelting, Water conservancy, Electric power, Chemical,

Pharmaceuticals etc

Pipe FlangeCarbon Steel FlangeForged FlangePipe Fitting FlangeWelding Neck FlangeWeld Neck FlangeBlind FlangeFlange TestingFlange Packing

Weld Neck Flange

Carbon Steel Weld Neck Flange, A 105 Weld Neck Flange, PN 16 WN Flange, Class 150 Weld Neck Flange, SCH 40 Wn Flange

HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com

Posted on