Sanitary centrifugal pump Instructions for use: Centrifugal sanitary installation of the best position of the pump below the suction level (such as the pump installation position higher than the suction level, pump required before the pump). Before using the impeller should check the direction of rotation is correct; pump inlet and outlet fittings nut is tightened; pump cover and the pump seal between the pump is good. Contact with the material before use steam sterilization, to ensure food hygiene. Pump outlet should be installed a butterfly valve to control the flow. Do not operate under overload for a long time to avoid damaging the motor. CIP cleaning should be carried out immediately after the pump is used to prevent material from sticking. If CIP is not required to be manually cleaned. First of all, hot water can be used for cleaning, then disassembled, and all the parts that the pump touches with the material are brushed with a brush, and then rinsed with clean water, cleaned, and then installed in sequence. Use found in the pump casing material dropped on the ground, it indicates leakage at the shaft seal. At this point you can check the mechanical seal on the shaft, if worn or seal damage, should be replaced or grinding before use. Wenzhou Yuan En Fluid Equipment Co., Ltd. sincerely invite you to cooperate!

358 Anti-Climb Security Fence

358 Anti-Climb Security Fence

358 Security Fence Introduction:

- 358 Security Fence also called high security fence, anti-climb fence, prison fence.It is extremely difficult to penetrate and difficult to attack using conventional hand tools. It has the features of anti-climbing and anti-cutting.
- 358 Security Fence is wide used for Retail,industrial and commercial properties, schools, public utilities,Military, airports, secure units and prison.

358 Anti-Climb Security Fence,Security 358 Fence Panel,358 Anti Climb Mesh Fence,358 Anti Cut Mesh Fence

HeBei Bosen Metal Products Co.,Ltd , https://www.bosenfence.com

Posted on