First, in the event of heating or other water leakage on the ground, it must be wiped clean, can not be directly sun exposure or baking furnace, so as not to dry too fast, cracking the floor.

Second, after the laying of the paint floor, try to reduce the direct sunlight, so as not to paint too much ultraviolet radiation, premature cracking and aging. Put furniture application rubber or other soft objects on the floor to avoid scratching the floor paint.

Third, the painted floor can't be kept for a long time. Avoid using plastic sheets or newspapers to cover it. After a long time, the paint film will become sticky and lose luster, and at the same time, avoid hot water basin, hot water pot and other things directly on the floor. Use a wooden board or a mat to protect it from damage.


A wood product

Fourth, keep the floor dry, clean, do not allow water to wet the mop mopping or scrubbing with alkaline water, soapy water, so as not to damage the brightness of the paint, damage the paint film. In case of ash or dirt, use a dry mop or wipe with a wrung wet mop. Wax once a month.

Fifth, when the floor is in use, if the individual floor is found to be warped or detached, the floor shall be taken in time, the old glue and ash shall be removed, new glue shall be applied, and compacted; if the individual floor paint film is damaged or white, it can be used. No. 400 water sandpaper, soap, water, sand, then wipe clean, dry after the local complementary color, dry color, then brush a paint, 24 hours, with 400 water sand paper polishing, and then rub the wax polishing.

Sixth, some parts of the board inadvertently stained should be promptly removed, if oil traces available rag or mop, warm water or a small amount of detergent to wipe, you can also use a little neutral detergent soap plus scrubbing. If the stain is serious, this method is ineffective and can be wiped with high quality sandpaper or steel wool. If it is a smear of a drug, beverage or pigment, it must be removed before the stain has penetrated the wooden surface. The cleaning method is to wipe it with a soft cloth dipped in furniture wax. If it is still ineffective, it must be rubbed with steel wool and furniture wax. If the surface of the floor is damaged by cigarettes, wipe it with a soft cloth impregnated with furniture wax to restore light. If it is contaminated with ink, it should be wiped with a soft wax dip cloth in time. If it is ineffective, it can be wiped with steel wool and furniture wax.

After the solid wood floor is installed and installed, the daily maintenance is the most important during the long-term use, which directly affects the service life of the floor. Some of the laminate floors that have been used for nearly a decade are still as good as new ones, while some have only two or three years of "serving" history but they have a lot of flaws. The mystery lies in the word "maintenance."





Flooring purchase Nature Flooring Del Flooring Flooring Furniture Heating

Metal Hole Saw

Metal Hole Saw,Carbide Big Hole Saw Bit,Metal Hole Saw Bit,Hole Saw Cutter Bit

Danyang Yongshun Tools Co.,Ltd , https://www.ysdrillbitset.com

Posted on