According to the current situation in China, the size and prototype of the indoor indoor stairs have often been defined, so the scope of decoration is limited to the decoration of ladders, railings, fences and handrails. So what should we consider when choosing a staircase? Take a look at the ten details that must be noticed by Jiu Zheng Xiaobian for you! First: First consider the location and modeling factors of the renovation staircase. Stairs are especially important for the layout of the home improvement. The space occupied by the stairs and the entrances and exits of the stairs must be carefully considered. Stairs are typically placed in dedicated stairwells or against corners of the wall so that they do not waste space or disrupt the overall layout. The entrance and exit of the stairs should be set according to the principle of easy walking and the shortest walking route. Staircase home improvement common sense: the need to pay attention to the purchase of stairs is a detail Second: Secondly consider the material of the stairs. The material of the stairs should be determined according to the style of the home decoration. The Chinese style should be purchased with a solid wood staircase. The modern minimalist style should be purchased with a steel-wood staircase. In addition, if there are old people or children in the home, the solid wood staircase is more suitable. Third: the slope of the stairs. The slope of the stairs refers to the angle between the front line of each step of the stairs and the horizontal line. The slope of the interior decoration stairs is generally 30%. The steepness and too slowness all affect the comfort of walking. Fifth: the height of the stair handrail should not be less than 90 cm, and should not be too high. Sixth: The gap between the balustrades should not be more than 11 cm. The excessively large gap is not conducive to the safety of children. Usually, the child's head cannot be extended. Seventh: Consider the possibility of meeting. The distance from the lower edge of the stairway to the corresponding pedal is generally more than 2 meters, and in principle it cannot be less than 190 cm. This factor is often forgotten in the renovation of stairs. Eighth: Stair paint. Try to choose brand stair vendors, because large-scale stair companies usually have more mature paint processes, and the paint on the surface of their products is not easy to wear. Ninth: The style details of the stairs are the key to the design of the entire staircase. The so-called details determine success or failure. An atmospheric and exquisite staircase can always make people look tired. Tenth: When choosing a stair business, it is best to visit their customers, experience the final quality of their products, listen to the customer's feelings, and shop around. Finally choose the most favorite staircase style. Diamond Wire For Sapphire Cutting
Most of the sapphire single crystals
produced in industry are ingots or ingots. The sapphire ingots need to be cut
into pieces before they can be used in mobile phones, LEDs and other fields.
The traditional mortar cutting technology has problems such as low efficiency,
high energy consumption, difficult purification and recycling, and serious
environmental pollution, so it is gradually transformed into a fixed abrasive
multi-wire cutting technology, that is, a Diamond Wire Saw cutting technology.
The Diamond Wire saw is a cutting tool that is collectively consolidated with
diamond abrasives. Because the kerf is less than 0.5mm, it can process ordinary
hard and brittle materials, and is suitable for cutting hard and brittle
materials such as sapphire, crystal, and solar polysilicon.
Diamond Wire For Sapphire Cutting,Diamond Wire Cutting,Diamond Wire For Sapphire,Diamond Wire Cutting Steel Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com
Fourth: The width of the indoor staircase is generally about 90 cm. If the single-layer area is large, it is appropriately extended to 95-100 cm.