Summer heat, in this high-temperature weather, is also a frequent period of fire. Because consumers need to be renovated in the summer, we must pay attention to the safety of decoration, that is, some preparations for fire prevention and anti-virus. At the same time we should also pay attention to the need to ensure a good decoration effect. Here's to talk to you about specific considerations. Pay attention to fire prevention, equipped with fire-fighting equipment, and use safety materials Summer decoration must pay attention to fire safety during construction. It is necessary to pay attention to electricity safety, and it must not be unwieldy to connect the wires. There is no protection tube on the power line. Smoking is prohibited at the scene and no open flame can be used. Flammable materials such as paint and thinner should be stored away from the fire source, cool, ventilated, and safe. The construction site should be cleaned every day to remove wood chips, paint scales, residues and other combustibles; ensure safe and smooth indoor exit; if necessary, equipped with fire-fighting equipment. In the decoration, fire protection materials should be used. In accordance with national standards, ceilings must be selected for non-combustible materials in the interior of the decoration. The non-flammable or non-combustible materials should be used on walls, floors, and grass-roots to minimize the risk of fire. . Ceiling keels, cabinets and other wood materials to do fire prevention. All electrical circuits should be sleeved, junction boxes, switches, trough lights, ceiling lamps and heat-generating devices around the application of non-combustible materials for fire prevention and heat treatment; when selecting room lighting, do not just look beautiful, but also carefully check the safety , should go to a reliable market to choose lamps that meet 3C certification. Ensure ventilation, reduce the concentration of paint coating volatiles, beware of explosion A large number of paints, coatings, and thinners in the decoration are easy to evaporate. If the indoor ventilation is poor, the volatile gases from the paint will not be easily discharged and they will accumulate in the room. The volatilized gas and air are mixed to form an explosive mixed gas. It is easy to explode when exposed to an open flame. When reaching its explosion limit, little attention is paid. When a light switch is turned on or an electric tool is turned on, the generated spark can bring serious problems. as a result of. The main components of paints and waterproof materials are mostly resinous organic polymer compounds, which contain a large amount of volatile solvents. When used, it is often necessary to use thinner to adjust viscosity for construction. These thinners are highly volatile and diffuse in the air, making them the culprit in worker poisoning during construction. Therefore, decorators must wear protective equipment when using paint in a closed environment. Painters should not stay overnight at the job site. Do not choose damp wood, carefully store to prevent deformation When selecting wood, you must go to a large wholesaler, but not a street shop. Because the wood of the large wholesalers is generally dried in the production area and then transported in containers, the wholesalers directly pick up the goods from the containers and then transport them to the homes of the decoration owners, which reduces the chance of wood dampening. If you are not sure, you may want to use a hygrometer to check the humidity of the wood at the time of purchase. It should be reminded that after the timber is bought back, it should be put in the house for two or three days. After it is adapted to the gas phase, the construction process will be carried out. Before construction, the ground should be kept dry and covered with a moisture barrier. In this way, the wood will basically no longer have the problem of deformation. The fourth pass: Buy tiles also see the moisture content to prevent cracks Ceramic tile variety, purchase should also pay attention to its moisture content. The surface is smooth and delicate, and the shiny surface is shiny and shiny, and the soft surface without a smooth surface is a product with a relatively good moisture content. At the same time pay special attention to the difference between pottery and porcelain, the water absorption rate is small, the structure is fine, the percussion sound is clear and mellow is the porcelain brick, and the water absorption rate is high, the structure has many holes, and the percussion sound is the ceramic brick. . Porcelain tiles with low water absorption are not prone to cracks when the temperature difference between day and night changes in the spring. To prevent cracking of the coating, first deal with the insulation layer, perfect the base layer and then brush Many new houses have a new type of insulation wall with inner insulation. This type of interior thermal insulation wall in the decoration, it is prone to latex paint cracking problems. In fact, this cracking is caused by cracks in the wall's cement, or the cracking of the wall's "insulation board" joints, not the quality of the decoration. However, in order to pursue a better decorative effect, the decoration company's technical staff came up with many ways to deal with insulation wall cracks, you can choose according to their own actual situation and decoration budget: One is to apply a layer of cloth to the surface of the wall after it has been cleaned, and use the tension of the fiber to ensure the integrity of the latex paint film. The other uses a decorative material with elasticity to do the substrate treatment for the wall surface. For example, some special putty can make up for the wall crack problem to some extent. Good quality latex paint can also play a role in covering the surface of small cracks. In addition, some consumers simply remove the wall insulation. Although this method can be used once and for all, it will reduce the insulation and thermal insulation properties of the wall, so it is not recommended. Four distinct seasons, minor troubles, preparation for warranty After the influence of external factors such as the moisture content in the air and changes in hot and cold air temperature throughout the year, minor problems such as paint peeling and wall cracking appear in the decoration and gradually appear. Therefore, choose a good decoration that can provide after-sales warranty service. The company is particularly important. Note Three trees paint entrance decoration paint decoration interior decoration latex paint interior decoration budget new home decoration budget cloth sofa tile adhesive ld tile
SMT Feeder Cart is used to store component feeder units on SMT Production Line. It is used in the preparation area or in the buffer area for SMT component feeders. KDW is developing high quality SMT Feeder Carts. KDW Feeder Carts are designed for all SMT Machine brands. We are producing feeder carts for Yamaha, Siemens, Samsung, Fuji, Juki, Panasonic, I-Pulse, Philips, and Sony SMT feeders. KDW offers stainless and aluminum type SMT Feeder Carts. We also have Feeder Carts that can be assemble/disassemble. The KDW feeder carts are guaranteed to be made from high quality materials and produced with high quality workmanship. Contact us if you would like to request for a copy of the SMT Feeder Carts Catalog.
SMT Feeder Cart,Smt Feeder Trolley,Nxt Feeder Trolley,Juki Feeder Trolley,Sony Feeder Trolley ShenZhen KDW Electronics Co.,Ltd , https://www.smtsplicetape.com
Uniform solid wood furniture   Ketu Sofa