Rainfall Shower Head, Hand Held Shower Head, Stainless Steel Shower Head, Bathroom Shower Head ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalves.com
Three roller gate installation skills:
First, determine the plan. Determine the plan when communicating with customers. The width of the site, the length of the site, and the number of machines that can be clearly installed. The selection of a vertical three-roll gate is still a bridge-type three-roll gate. The vertical three-roll gate has an external dimension of 420x330x980 (mm). , Bridge type three-roller gate Dimensions: 1200x280x1000 (mm), three-roller brake lever to the chassis size 510mm, that is, the vertical three-roll gate occupies the floor area: 420x (330+510), the bridge-type three-roll gate covers an area of ​​1200x (280+510), when determining the type selection, fully consider that the gates and brake levers have space left. Each tri-roller gate covers an area, lays a position, and how to route the wires (it is still a dark line to go). The goal was set, waiting for the three-roll gate to the site.
Second, orientation routing. According to the once-conclusive plan, clear the detailed dimensions of the three-roll gate device, do a 50-100mm gap between the gate and the gate, and open the cover to prevent adjustment of the machine, repair, etc. Without leaving space, two 6-to-8-point plastic pipes are embedded between the gates and gates. One hose takes the power cable (strong power), and the other hose takes the signal cable (weak current). It cannot connect the power cable. Take a rubber hose along with the signal cable. This will affect the communication function. The buried pipe should be exposed to a height of 30-40mm above the ground. The vertical three-roll gate should be at the bottom of the machine center, and the bridge type three roller gate should be at two. The side is good (because the bridge bottom of the triple roller gate is closed).
Third, fixed adjustments. Fixed bottom is fixed with 4-M10x100 expansion screw, can not shake, the whole level, the appearance of the entire common, (preferably fixed before using a fine line to pull straight, vertical and horizontal common), between the three roller gate and the three roller gate series selection Methods, one by one, straight lines can be used normally.
Three roller gate maintenance:
The non-corner design of the three-roll gate machine can not only prevent personal injury during accidental collisions, but also ensure pedestrian safety. The three-roll gate adopts an all-stainless-steel shell, and the internal components of the chassis are all anti-corrosion-treated and durable, while the good operation of the three-roll gate is inseparable from the maintenance work. So, how to properly perform the maintenance of the three-roll gate?
1. The three-roll gate should pay attention to waterproof and moisture-proof. No matter what occasion the three-roll gate is used, it is necessary to take into account the fear of water hazard of the gate. Even indoors, you need to notice this little detail.
2. The three-roll gate prevents heavy collisions. Although the materials used for manufacturing the three-roll gate are generally stainless steel with good quality, there will always be a force limit. So do not try to hit it in order to try the sturdiness of the three-roll gate. In addition, Calto manufacturers warn users that a heavy impact may cause damage to internal parts or wiring.
2. When the three-roller gate is in the vicinity of the magnetic field, when the gate is working, pay attention to the factors that may cause abnormal operation of the equipment around the tripod gate to avoid the magnetic field interference.
3, three roller gate attention to the connection of the line Why pay attention to the problem of the three roller gate circuit? This is due to the fact that the three-roll gate will have a self-protection function set by the system during power-on operation. When there are special circumstances, there is a certain degree of automatic operation to maintain the safety of the gate.
4 Tri-roller gate external maintenance:
Since most of the three roller gates are made of stainless steel, the surface is prone to rust and spots, and the appearance needs to be cleaned once a week. The surface of the chassis can be polished with a soft cloth and fossil powder, coated with anti-rust oil, and just coated. Rust oil should not be rubbed by hand, otherwise it will destroy the effect of surface rust, until 3 to 5 hours of natural drying can be used after hand contact.
5, three roller gate circuit maintenance:
According to past usage of three-roll gate users, especially the maintenance and maintenance of the electronic control part, check whether the aging of the wire and whether the power supply is exposed need to be replaced in time. Refer to the instructions and carefully check the parameters of each part. If you find a problem, be sure to find a professional to assist in the replacement of individual electronic components.
5, three roller gate core maintenance:
Open the cover to cut off the power, clean the power dust, in order to make the solenoid valve to reduce resistance when moving left and right, you should add butter or oil to the rotating part of the machine after cleaning to maintain the movement, because the movement is the heart of the machine, monthly At least once. Check whether the machine fasteners are loose, tighten the fasteners, and check the wear of the wearing parts.
The three-roll gate is suitable for all kinds of public places that require pedestrians to pass through, such as scenic spots, exhibition halls, movie theaters, docks, train stations, bus stations and other places that require ticket checking; factory attendance, dining hall consumption, golf courses, and monthly cards Places such as leisure centers that need to be authorized to enter; electronic factory anti-static control areas, need to identify faces, fingerprints, and other security measures tight units.